SVG to STL converter, free and online
Upload an SVG or a picture and get its outline pulled up to a height as an STL: no plate, exactly in the millimetres you enter.
Material and quantity
A finished print, as an examplelib:animals/cat
On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.
It prints lying flat without supports. A motif in another colour comes from a filament swap. A standing logo prints separately from its base and slides into the slot, so each can have its own colour.
What the SVG to STL converter does and where it stops
The tool takes the filled shapes of an SVG file and pulls them straight up to the height you enter: 0.6 to 50 mm. You set the width from 20 to 250 mm and the other dimension follows the proportions, so the model has exactly the millimetres you read next to the preview; the units written in the SVG do not matter. Holes inside a shape stay holes. The SVG may be up to 400 kB, and lines without a fill are left out and the tool says so. Instead of an SVG you can upload a simple high-contrast PNG, JPG or WebP picture up to 5 MB, pick a silhouette from the library, or type a text. What comes out is a closed solid with a bottom, a top and walls, which a slicer takes without repair. The tool warns in advance about lines thinner than 0.8 mm, which a 0.4 mm nozzle cannot print cleanly, and says how many separate pieces the shape consists of.
An example from 27 October 2026: the cat silhouette from the library, 80 mm wide and pulled up to 6 mm, came out at 80 × 81 × 6 mm, 2,568 triangles and 17.7 cm³. The calculation gives it 9.6 g of PLA and 17 minutes of printing (calculation /c/lfa9iggn3hls). You download the model free and without an account as an STL, or as a 3MF project for OrcaSlicer, Bambu Studio or PrusaSlicer with the settings of the calculation. If you have no printer, our farm prints the shape in a colour loaded in the printers right now.
Before you order
How high should I pull the shape so that it prints and holds?
At least 0.6 mm, that is three layers of 0.2 mm; a tag or a door sign takes 2 to 3 mm, a key pendant 4 to 6 mm, and a shape that should stand on its own 20 mm or more. The higher, the more grams and minutes; the calculation recounts after every change.
How thin can the lines be?
A 0.4 mm nozzle needs two lines side by side, so at least 0.8 mm. The tool marks lines under 0.8 mm in advance; thicken them in your editor or make the shape bigger.
How much does a printed shape cost and how long does it print?
The 80 mm cat pulled up to 6 mm weighs 9.6 g and prints in 17 minutes (PLA). Your shape shows its grams, minutes and price in the calculation before you order anything.
Can the motif be in a different colour than the base?
An extruded outline is one colour. If the motif should sit on a plate in another colour, switch the style to a relief: the colours then lie one above the other and a printer manages them with a filament change at the height of the plate, at our farm or at home.
How long does delivery take?
We dispatch on the day the print ends, on working days. Packeta usually delivers within 1 to 2 working days in the Czech Republic, to a pickup point for €4.00, to your door for €6.00; to Slovakia from €5.90, to the EU from €7.90.
Can I edit the result further?
Yes. The STL is an ordinary model: you scale it in the calculator, the Puzzle tool cuts it into pieces, the Mold tool makes a casting mold of it, and the Cookie cutter tool makes a cutter from the same outline.
Who it is for
A company or club logo
A logo from a vector file as a desk sign, a key pendant or an emblem on a door, 60 to 120 mm, exactly as the artwork.
An exact part from a 2D drawing
A spacer, washer, template or insert you have drawn in a CAD program or in Inkscape: the width in millimetres, holes stay holes.
A drawing or an icon
A child’s drawing turned into an outline, an icon from the Noun Project or a silhouette from our library as an ornament, a magnet or a pendant.
How it works
- Upload an SVG, a picture or a text. An SVG up to 400 kB, a PNG, JPG or WebP picture up to 5 MB, a silhouette from the library, or a line of text. The cat from the library is preselected to try the tool.
- Enter the width and the extrusion height. Set the width in millimetres with the slider or by dragging the arrow in the preview, the height from 0.6 to 50 mm. One tick bevels the top edge.
- Read the warnings. Next to the preview are the outer dimensions, below it a note about lines under 0.8 mm and about separate pieces, if there are any.
- Download the STL or order a print. The STL or the slicer project is free to download with no sign-up. A print from us continues to the calculation, where you see the grams, the minutes and the price.
What the tool can make
Common questions
Why does my slicer take an STL from here without errors when another converter gave a leaky mesh?
Every outline gets a bottom, a top and walls, and the bodies are joined into one closed mesh. The slicer therefore reports no open edges or flipped faces and the model needs no repair.
How do I prepare the SVG so that all of it converts?
Everything that should print must be a filled shape. In Inkscape convert lines with Stroke to Path and text with Object to Path; Illustrator and Affinity do the same. Layers, masks and gradients are not read.
How do I get exact dimensions in millimetres?
You enter the width and the other dimension follows the proportions, so the shape is never distorted. The dimensions written in the SVG (px, mm, inches) are not used; what you read next to the preview is what you get.
Why did the shape fall apart into several pieces?
An extruded outline has no plate, so nothing joins the separate parts of a drawing, and the tool says how many there are. If they should hold together, switch the style to a relief on a plate, or join the drawing in your editor.
Can I upload a PNG or a JPG instead of an SVG?
Yes, a simple picture with a dark motif on a light background. The outline is traced in a grid of at most 360 points on the longer side, so an SVG gives smoother edges. A photo does not belong here; the Relief and lithophane tool is for that.
Is the conversion free, and do I need an account?
The conversion and the STL download are free and need no account, and the uploaded file is not passed to anyone. You need an account only when you have the shape printed by us; that is paid from credit topped up by card, and we ship by Packeta across the EU.
Where next
Looking for something else? See all Tools
