matplace
ToolsStamp and embossing plate

Custom stamp to 3D print for clay and polymer clay

Type a text or upload a motif. We mirror the stamp for you; switch the preview to the imprint to see what it leaves.

Input

Text or motif
Symbols

An SVG with fills, or a simple black-and-white picture (PNG, JPG). Uploaded artwork takes precedence over the text.

Motif
Handle

Size

Size
15–120 mm
0.8–4 mm
Wall thickness and more

Colours

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

Made for clay, polymer clay and other modelling compounds. A printed stamp is not suited to ink and paper, the surface is too hard. The handle prints separately and is glued on.

What the stamp presses into, how it is made and what it costs

The tool makes a stamp for impressions in ceramic clay, polymer clay, soap or dough, that is in a soft material that keeps the impression. The motif can be a text of up to two lines of 20 characters in one of four typefaces, an SVG or a simple black-and-white picture; an uploaded artwork takes precedence over the text. The motif is mirrored by itself, so the impression reads right; the preview can be switched to the impression the stamp leaves. You set the width of the motif from 15 to 120 mm, its height from 0.8 to 4 mm, and pick a stamp with a round handle or just a plate. The motif can be raised, then it presses in, or recessed, then the impression stands out of the material. The tool warns about lines thinner than 0.8 mm. A printed stamp does not suit ink and paper, its surface is too hard.

An example from the production calculator (28 October 2026, PLA): the stamp EVA 50 mm wide with a handle and a raised motif weighs 6.8 g and prints in 28 minutes (calculation /c/qr5iss66z3ip). The handle prints separately and is glued to the plate with superglue. A stamp with a logo for a pottery studio or a maker’s mark for the bottom of mugs prints the same way, you just upload an SVG. You download the model free as an STL or a project for your printer.

Before you order

How much does a stamp cost from you?

A 50 mm stamp with a handle weighs 6.8 g and prints in 28 minutes (PLA). A stamp is priced by grams and minutes; you see the price before you order anything.

How do I make a maker’s mark for the bottom of mugs?

Upload the logo as an SVG or type your initials, choose a raised motif, a width of 20 to 40 mm and a motif height of 1 to 1.5 mm; the impression in leather-hard clay is then clean. With a handle the stamp is easier to hold, without one you press it with your thumb.

How long do printing and delivery take?

A 50 mm stamp prints in 28 minutes. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).

Does the stamp suit soap and dough?

Yes, anything soft that keeps the impression: soap, fondant, shortcrust dough, polymer clay. For a raised logo on soap choose a recessed motif. Printed plastic is meant for a brief touch with food; wash the stamp by hand, not in the dishwasher.

How big a stamp should I choose?

A maker’s mark 20 to 40 mm, a decorative stamp for ceramics 50 to 80 mm, 120 mm at most. The bigger the stamp, the more pressure it needs; press a large motif with a rolling pin over a plate without a handle instead.

Do I need an account?

Not for the design or the download. You need one only when you have the stamp printed by us; that is paid from credit topped up by card.

Who it is for

A pottery studio

A 30 mm maker’s mark for the bottom of mugs and bowls, a raised motif, with a handle.

Soap making

A 50 mm recessed motif that leaves a raised logo on the soap; a stamp from PETG takes the damp.

Baking and fondant

A "Hand made" stamp or a name for dough and fondant, from PLA, washed by hand.

How it works

  1. Type a text or upload a motif. Type the text in one or two lines, or upload an SVG or a picture with a dark motif on a light background. An uploaded artwork takes precedence over the text.
  2. Pick the motif and the handle. Choose a raised or a recessed motif and a stamp with a handle or without one. Set the width and the height of the motif.
  3. Switch the preview to the impression. With "The impression it leaves" you check what the impression will look like. The tool warns about lines thinner than 0.8 mm.
  4. Order the print or download. Order the print from our farm. Or download the model free as an STL or a finished project for your own printer.

What the tool can make

The stamp EVA with a handle, a 56 × 23 mm plate, a raised motif for clay: 6.8 g, 28 minutes.
The stamp EVA with a handle, a 56 × 23 mm plate, a raised motif for clay: 6.8 g, 28 minutes.
The two-line stamp HAND MADE with a handle, a 66 × 41 mm plate, for ceramics.
The two-line stamp HAND MADE with a handle, a 66 × 41 mm plate, for ceramics.
The plate OK without a handle, 46 × 25 mm, a recessed motif, the impression stands out.
The plate OK without a handle, 46 × 25 mm, a recessed motif, the impression stands out.

Common questions

Does the stamp suit paper and ink?

No, the surface of a printed stamp is too hard for that and ink does not hold on it. It is meant for impressions in ceramic clay, polymer clay, soap or dough.

Do I have to mirror the motif in advance?

No. The tool mirrors the text and the uploaded picture by itself. Prepare the artwork the way the finished impression should look, and check it with the preview "The impression it leaves".

How is the handle fixed?

The handle prints as a separate part and is glued to the plate with superglue. The glue is not part of the print; without a handle the plate serves as an embossing plate under a rolling pin.

What is the difference between a raised and a recessed motif?

A raised motif presses into the material and leaves a sunken impression, a signature on the bottom of a mug say. A recessed motif is cut into the plate, so the impression stands out of the material, a raised logo on soap say.

How fine a detail does the stamp manage?

Lines thinner than 0.8 mm do not print cleanly or at all and the tool warns about them. Enlarging the stamp or thickening the lines in the artwork helps; a motif height of 1 to 1.5 mm gives the most legible impression in clay.

How do I print the stamp at home and clean it?

Motif up, without supports, from PLA or PETG, 0.2 mm layers or finer for smoother edges. Wash clay off the stamp with water and a brush; before stamping into a sticky material dust the stamp with cornstarch.

Where next

Looking for something else? See all Tools