matplace
ToolsCharm from a picture or a name

Custom charm from your own picture or name, 3D printed: for keys, bags and backpacks

Upload a picture, pick one from the library, or type a name. You get a charm in the colours of our filaments, with an eyelet you can move wherever you like.

Input

Start from a preset
Picture

PNG, JPG, WebP or SVG. A drawing with a few solid colours comes out best; from a photo we pick the main colours.

0–100
0–1 mm
Adjust the photo (contrast, brightness, saturation)
50–150 %
50–150 %
0–200 %
Or a name instead of a picture
Symbols
Typeface of the text (30)

Sans serif

Serif

Handwritten

Display

Typewriter and pixel

Size

Shape
Size
20–120 mm
2–6 mm
0–3 mm
0–100 %
2–6 mm

You can grab the eyelet in the preview and drag it along the outline.

Wall thickness and more

Colours

1–8

0.4–1.2 mm

Material and quantity

A finished print, as an examplelib:colour/happy-ghost

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

It prints flat, face up, without supports. The colours lie one on another, so a printer with a single nozzle can print it too: just swap the filament at the heights the project contains. With flush colours it prints face down, so the face is smooth from the bed.

How the charm is made, where the eyelet goes and what it costs

The tool turns a picture or a name into a charm for keys, a bag, a backpack, a zip pull or a gift tag. Upload a PNG, JPG, WebP or SVG, pick a motif from the library, or type a name in one of thirty typefaces; loose pieces of a typeface are tied with a bridge so that the charm holds together. The background disappears by itself and the picture is reduced to 1 to 8 colours of filaments we have in stock on the farm. The charm follows the outline of the picture, or is a circle or a rectangle, 20 to 120 mm wide and 2 to 6 mm thick, with a frame of up to 3 mm round the picture. The eyelet moves anywhere along the outline by a slider or by dragging it in the preview, with a hole of 2 to 6 mm and a wall of 1.5 to 3 mm. The colours lie one on another, each 0.6 mm higher unless you change it.

An example from the production calculator (28 October 2026, PLA): the happy ghost from the library, 45 mm wide and 3 mm thick, weighs 3 g and prints in 7 minutes (calculation /c/mca5ddgfzctt); the name Ela in a script, 60 mm wide, weighs 3.7 g and prints in 12 minutes (calculation /c/gmfsgcpwmjl8). Several pieces of the same design go in as the quantity and the price per piece falls; charms with different names are different designs. Our farm prints up to four colours in one print, the base and three more; you confirm the spool of each colour when ordering. The STL, a ZIP with one STL per colour and the slicer project download free, without registration.

Before you order

How much does a charm cost from you?

The 45 mm happy ghost weighs 3 g and prints in 7 minutes (PLA); you see the price in the calculation before you order anything. Several pieces of the same design go in as the quantity and the price per piece falls; the key ring is not in the price.

Which size and thickness should I choose?

For keys 35 to 45 mm and 3 mm thick, for a backpack or a bag 50 to 60 mm, for a zip pull 20 to 25 mm and 2 mm. A gift tag can be 60 to 80 mm and 2 mm thick, nothing strains it.

How long do printing and delivery take?

The 45 mm ghost prints in 7 minutes, the name Ela at 60 mm in 12 minutes. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).

Which picture suits it?

A drawing, a logo or a photo with a clear motif on a calm background; the tool removes the background and the charm follows the outline. Thin spikes under 0.8 mm would break, so the tool merges them or warns; put a portrait from a photo on a circle or a rectangle.

Does it suit a company gift or a market stall?

Yes. A logo from an SVG in two colours or the names of the staff, 50 mm, 20 to 50 pieces; the same design in pieces comes cheaper per piece, different names are different designs. For markets, library silhouettes in various colours work well.

Do I need an account?

Not for the design or the download. You need one only when you have the charms printed by us; that is paid from credit topped up by card.

Who it is for

A name tag for a nursery backpack

The child’s name in a script or a favourite animal from the library, 50 mm, 3 mm, an eyelet for a carabiner.

A gift with a pet’s photo

The silhouette of a dog from a photo in three colours, 45 mm, for keys.

Company charms with a logo

A logo from an SVG in two colours, 40 mm, 50 pieces of the same design, rings bought separately.

How it works

  1. Upload a picture or type a name. Upload a picture, pick one from the library, or reuse one you uploaded earlier. Instead of a picture you can type a name or a short text on one or two lines.
  2. Tune the outline and colours. A slider from 0 to 100 sets how much of the background goes; edges can be smoothed by up to 1 mm. Choose the number of colours, give each a filament in the colour window and, if you like, join two colours into one.
  3. Set the size and the eyelet. Enter the width, the thickness and a frame of up to 3 mm round the picture, with a bevelled edge if you want one. Grab the eyelet in the preview and drag it to the point the charm should hang from.
  4. Order the print or download. Next to the preview you see the size; the calculation after "Continue" shows the exact price and print time. You can also download the model as an STL, a ZIP with one STL per colour or a slicer project, free and without registration.

What the tool can make

Happy ghost 45 mm wide, white with dark eyes and pink cheeks: 3 g, 7 minutes.
Happy ghost 45 mm wide, white with dark eyes and pink cheeks: 3 g, 7 minutes.
Smiling yellow star 50 mm wide, the eyelet on a point.
Smiling yellow star 50 mm wide, the eyelet on a point.
The name Ela in handwritten letters, 60 mm wide, joined into one piece: 3.7 g, 12 minutes.
The name Ela in handwritten letters, 60 mm wide, joined into one piece: 3.7 g, 12 minutes.

Common questions

Can I use just a name instead of a picture?

Yes. Type one or two lines and pick one of thirty typefaces, from bold sans serifs to handwriting. The tool ties loose pieces together with a small bridge so that the charm holds together, and tells you so.

Where can the eyelet go, and what goes through it?

Anywhere on the outline: by a slider, or by dragging it in the 3D preview. The hole is 2 to 6 mm, 3 mm by default, and the ring wall 1.5 to 3 mm. A common key ring and a backpack carabiner pass through a 3 mm hole; neither is part of the print.

How does it differ from the keychain?

The keychain is a plate with a name and a shape from a list; the charm follows the outline of your picture or lettering and has its eyelet anywhere. For a gift tag or a zip pull take the charm, for keys with a name on a plate the keychain.

How are the colours printed?

The colours lie one on another, each 0.4 to 1.2 mm higher. Every layer is therefore a single filament, which you swap at the right height; the project for OrcaSlicer, Bambu Studio and PrusaSlicer contains the swaps. Colours flush with the surface and a rim in its own colour need a printer that changes filament by itself (AMS, MMU, ACE).

How many colours does the farm print?

Up to four in one print: the base and three colours on top of it. You confirm the spool for each colour when ordering; the ones from the design are preselected. A design with more colours can be downloaded free for your own printer.

What is the charm printed from, and does it last on keys?

We recommend PLA; it prints flat, face up and without supports. A thickness of 3 mm and a 2 mm eyelet wall take keys in a pocket, and the tool warns about thin motifs under 0.8 mm. For a charm that will get warm, for example in a car in the sun, PETG is the better choice.

Where next

Looking for something else? See all Tools