3D printed Christmas ornament from a picture or a name
A Christmas ornament from your own picture or a name: a gingerbread man, a tree, a photo of the dog. The colours are filaments we have on the farm, and the eyelet for a ribbon is at the top.
Material and quantity
A finished print, as an examplelib:colour/gingerbread-man
On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.
It prints flat, face up, without supports. A PLA ornament is light and hangs on a branch even from a thin ribbon. With flush colours it prints face down, so the face is smooth from the bed.
How the ornament is made from a picture, how many colours it takes and what it costs
The tool turns a picture into a flat Christmas ornament with an eyelet for a ribbon. You upload a PNG, JPG, WebP or SVG, pick a motif from our library (about 137 motifs, 8 of them in colour), or type a name in one of thirty typefaces instead of a picture. The background is removed by itself and the picture is reduced to 1 to 8 colours; each is matched to the nearest filament our farm really has in stock. The ornament follows the outline of the picture or is a circle or a star, 40 to 150 mm wide and 2 to 5 mm thick. The colours lie one on another, each 0.4 to 1.2 mm higher, so any printer prints the ornament with filament changes at the heights the downloadable project carries; our farm prints up to four colours in one go.
An example from the production calculator (18 October 2026, PLA+): an 80 mm wide gingerbread man from the library weighs 10 g and prints in 18 minutes; six pieces come to 160 CZK, that is 27 CZK per ornament, because the order preparation is paid once. The calculation counts one colour, the spools for the other colours you confirm at the order. The ornament prints flat, face up and without supports, weighs about ten grams and hangs even on a thin ribbon. The STL, a ZIP with one STL per colour and the slicer project are free to download, no sign-up.
Before you order
How much does an ornament cost from you and how long does it print?
An 80 mm gingerbread man prints in 18 minutes; six pieces come to 160 CZK, that is 27 CZK per ornament (PLA+, without delivery, calculation of 18 October 2026). The calculation shows the price of your ornament before you order anything.
Can I make an ornament from a child’s drawing?
Yes. Photograph the drawing on white paper from above in daylight, the tool removes the background and merges the colours into 2 to 4 filaments; thicken faint pencil lines with a marker. The ornament then follows the outline of the drawing, or you put it in a circle.
How long does delivery take?
We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00). Before Christmas, order in good time.
How do I print the ornament at home in several colours?
Flat, face up, without supports. The downloaded project carries filament changes at the heights of the colours; with one nozzle you swap spools at the pause, a printer with AMS, MMU or ACE swaps them by itself.
Will the ornament last outdoors or by the fireplace?
For a tree indoors PLA is enough. Near a radiator or a fireplace choose PETG, which takes more heat; a thin ornament does not suit sun and frost outdoors, and colours fade in direct sun.
Do I need an account?
Not for the design or the download. You need one only when you have the ornaments printed by us; that is paid from credit topped up by card.
Who it is for
A tree of children’s drawings
Every drawing as a 70 to 90 mm ornament in three colours with a ribbon eyelet; from one photo of the drawing in seconds.
A company gift with a logo
A logo from an SVG as an ornament in the company colours, up to four colours in one print, for customers and the team.
For Grandma with the grandchildren’s names
A name in one of thirty typefaces on a circle or a star, a different colour for every grandchild.
How it works
- Upload a picture or type a name. Upload a picture, pick one from the library, or use one you uploaded before. A name or a short text may have one or two lines, in one of thirty typefaces.
- Pick the shape, the size and the eyelet. The ornament follows the picture, or is a circle or a star. Set the width, the thickness and a margin around the picture of up to 3 mm. Move the eyelet with a 3 to 6 mm hole anywhere along the outline with the slider or by dragging; a button puts it back on top.
- Adjust the colours. Choose the number of colours and give each one a filament in the colour window. Change which colour lies on which, or merge two colours into one. The 3D preview shows the ornament in the filament colours with its size in millimetres.
- Order the print or download. Next to the preview you see the dimensions; the exact price and print time show in the calculation after "Continue". Or download the STL, a ZIP with one STL per colour or the slicer project, free and without sign-up.
What the tool can make
Common questions
Which picture suits an ornament?
Best a drawing with a few solid colours, a gingerbread man or a tree say. From a photo the tool picks the main colours; contrast, brightness and saturation are tuned with sliders. If the whole photo should show, switch the background removal off.
How big an ornament suits the tree?
60 to 90 mm for an ordinary tree, 40 to 50 mm for a small table-top one; an 80 mm ornament weighs about 10 g. The 3 to 6 mm eyelet takes a ribbon or a hook. Bigger ornaments up to 150 mm suit a door or a window.
Does a printer with one nozzle print the colours too?
Yes. The colours lie one above the other, so the filament is only changed at the given height; the project for OrcaSlicer, Bambu Studio and PrusaSlicer carries those changes. The options "Colours flush with the surface" and "Rim in its own colour" need a printer that changes filament by itself (AMS, MMU, ACE).
How many colours do you print?
Up to four in one print: the base and three colours above it. You confirm the spool for every colour at the order, the ones of the design are preselected. An ornament with more colours you download free and print on your own printer.
What material is the ornament printed from?
We recommend PLA. An ornament of it is light and prints flat, face up and without supports. Choose PETG only if the ornament will hang somewhere warm.
What does the tool warn about?
Lines thinner than the nozzle. Also that it joined separate pieces of the picture with a small bridge so they hold together, and that the picture has fewer distinct colours than you asked for.
Where next
Looking for something else? See all Tools
