Split a 3D model into parts online
A model that does not fit your printer is cut by planes into pieces that do: with pins or dovetail keys in the joints, with numbers engraved in the cuts, and laid so that they print without supports.
Material and quantity
On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.
The pieces print cut face down. Pins Ø 6 × 12 mm and keys are pieces of their own; the holes have 0.2 mm of play. Glue them by the numbers and the map of the pieces.
How the split works, what you get and how to glue the parts
The tool cuts the model with planes across its width, depth and height into parts that fit the bed you choose: our farm at 250 mm, common printers at 220 or 180 mm, or your own size. It makes as few cuts as possible, you can move the planes with sliders and the preview shows them right on the model. Every part is turned to lie on its largest cut face, so the joint prints without supports. Into the joints it adds pins of 6 mm diameter with holes on both sides and 0.2 mm of play, or dovetail grooves with a loose double-sided key that slides in from the side; plain cuts for gluing only are there too. It engraves each part’s number into its cut face and shows a map on the page of how the parts lie against each other. It takes STL, 3MF, OBJ and STEP from 5 to 1000 mm and up to 2 million triangles, closes a model that is not closed first, and refuses a shape that does not fit even after six cuts in one direction.
An example from the production calculator (18 October 2026, PLA+): a cylinder of ⌀ 120 × 320 mm does not fit a 250 mm bed. The tool split it with one cut into two parts with four pins; both parts and the pins together weigh 814 g, print in 13 h 8 min and cost 1,440 CZK (about 58 EUR) from us. The split took under a minute. The parts open as a new file: in the preview each has its own colour and the map says which goes where. You download them one by one as STL or all of them as a slicer project, or have them printed by us in one order; the original model stays.
Before you order
How much does printing the parts cost with you?
The calculation adds up all the parts and the pins: the cylinder of ⌀ 120 × 320 mm in two parts came to 1,440 CZK (814 g, PLA+, without delivery). You order the parts in one order and get them together.
How many cuts will it take?
The tool says after the upload: a figure 60 cm tall needs two cuts for a 250 mm bed, that is three parts. You can move the planes to where the joint hides, say the waist or the edge of the base.
Which pins do I use and how many will there be?
The pins are 6 mm in diameter and the holes have 0.2 mm of play. The tool puts as many into each joint as fit (the cylinder of the example got four) and adds them to the file as a separate part; wooden 6 mm dowels do the job too.
How long do printing and delivery take?
The calculation adds up the time of all the parts; the cylinder of the example printed in 13 h 8 min. The parts print one after another, we dispatch on the day the last one ends, on working days; Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).
Can I scale the model up at the same time?
That is what the Life size tool is for: you enter the height in centimetres and the model is scaled and split in one go. Here the model is only cut; change the size beforehand in the calculator.
Is the split free, and do I need an account?
The split and the download of the parts are free and need no account; the file serves only the computation and is passed to nobody. You need an account only when you have the parts printed by us.
Who it is for
A life-size figure
A statue, a bust or a game character over 250 mm: parts with pins, a number in the cut and a map of how they go together.
Cosplay and props
A helmet, a sword or a shield longer than the bed: dovetail keys hold without glue and the parts travel taken apart.
A long part
A rail, a cover or a holder longer than 250 mm: one cut, two pins, and a sanded and painted joint does not show.
How it works
- Upload the model. Drop an STL, 3MF, OBJ or STEP of 5 to 1000 mm into the field, or click and choose the file.
- Choose the bed and the joints. Pick the printer the parts are for (250, 220, 180 mm or your own) and the kind of joint: pins, dovetail keys, or plain cuts. The tool says how many cuts are needed and you can move the planes.
- Split the model. Click "Split the model". Large models take up to a minute; the page says what is going on.
- Download the parts or order the print. You see the parts in the preview, each in its own colour, with the map and the numbers. Download them one by one or as a slicer project, or have them printed by us.
Common questions
Pins, dovetails, or a plain cut?
Pins are the strongest with glue and invisible from the outside. Dovetail keys hold without glue and the parts come apart again, but the key slides in from the side, so it needs room. A plain cut is the quickest to print and holds by glue alone; it suits parts that stand on each other.
How do I glue the parts?
By the numbers engraved in the cut faces and the map on the page. Push the pins into the holes (they are in the file as the part "pins", or use wooden 6 mm dowels) and glue the parts with superglue or a glue for plastics. Dovetail keys hold without glue.
Will the joint show?
As a thin line: the parts lie cut side down, so the cut face is flat, and the pins and holes are inside. The 0.2 mm of play disappears after gluing; for a smooth surface, sand the joint and fill or paint it.
Why do the parts lie on their cut face?
The cut face is flat, so it holds on the bed and the joint needs no supports. A part with several cuts goes down on the largest one. A part you want turned differently you turn in your slicer.
What if a part still does not fit?
The tool says so. Add a cutting plane, choose a bigger bed, or scale the model down in the calculator first. A shape that does not fit even after six cuts in one direction is refused.
How big a model can the tool handle?
Up to 1000 mm and 2 million triangles; a heavier mesh is simplified when possible. A model with holes is closed first the way our farm does it; if that fails, the tool says so and the Model repair tool helps.
Where next
Similar tools
Looking for something else? See all Tools
