matplace
ToolsHollow a model

Hollow out a 3D model online, free

A solid model becomes a hollow one with the wall you choose and drain holes in the bottom. It saves material and hours of printing; the tool says how much.

File

Settings

1.5–6 mm

Free, a few seconds to a minute. The model stays, the hollow one opens as a new file.

Result

Sizes and parts appear with the preview.

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

A hollow model prints like a solid one; set the infill in your slicer as you like, the wall is in the model already. The drain holes are for resin printing and for shaking supports out; for FDM you may plug them.

What hollowing does to a model, when it pays off and where it stops

The tool removes the inside of the model and leaves a wall of the thickness you choose, 1.5 to 6 mm. It measures the distance from the surface on a fine 0.6 mm grid (coarser for models over 190 mm, and the tool says so) and the inner surface forms where the wall thickness is reached; that is why it follows the shape even in folds and the cavity never breaks through to the surface. From the outside the model does not change by a tenth of a millimetre. Drain holes of 3 to 8 mm appear in the bottom of the cavity: as many as fit, four at most, or the number you enter; they can also be switched off. It takes STL, 3MF, OBJ and STEP from 5 to 1000 mm and up to 2 million triangles; a model that is not closed is closed first, the same way our farm does it. The hollow model opens as a new file and the original stays.

An example from the production calculator (18 October 2026, PLA+, 0.2 mm layers, 15 % infill): a solid cylinder of ⌀ 120 × 200 mm weighs 503 g, prints in 8 h 14 min and costs 910 CZK (about 37 EUR) from us. Hollowed with a 2.5 mm wall and three holes it weighs 223 g, prints in 6 h 36 min and costs 500 CZK (about 20 EUR): 280 g and 410 CZK less, the same on the outside. For resin printing the difference is bigger still: the solid cylinder would swallow 2.3 litres of resin, the hollow one with a 2.5 mm wall about a quarter of a litre (computed from the volume, not printed). The tool shows the volume of the cavity, the grams saved and the price difference right after hollowing; the x-ray in the preview shows the wall. You download the model as an STL or a slicer project, or have it printed by us.

Before you order

How much do I save on the print price with you?

It depends on the size. A cylinder of ⌀ 120 × 200 mm cost 910 CZK solid and 500 CZK hollowed with a 2.5 mm wall (PLA+, without delivery); for a small part the price may not change, because an order has a minimum price. The tool shows the difference right after hollowing and the calculation confirms it.

Does a hollow model print without supports?

On the outside exactly like a solid one. Inside, the cavity has a ceiling that the slicer either bridges or props up with inner supports; you shake those out through the drain holes after printing. For FDM choose a 2 to 3 mm wall, the slicer still fills it according to its settings.

How do I hollow a model for resin printing?

A 2 to 3 mm wall and at least two holes of 3 to 4 mm in the bottom, so that the resin drains and no vacuum forms. A solid cylinder of ⌀ 120 × 200 mm would swallow 2.3 litres of resin, a hollow one about a quarter of a litre.

How long do printing and delivery take?

A hollow model prints in less time: the cylinder of the example in 6 h 36 min instead of 8 h 14 min. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).

Can I weight the cavity with sand?

Yes. Pour sand or shot in through the holes in the bottom and seal them with a glue gun or a piece of plastic. A paperweight, a flag stand or a figurine then stands firmly and the model stays light to print.

Is hollowing free, and do I need an account?

Hollowing and the download of the hollow model are free and need no account; the file serves only the computation and is passed to nobody. You need an account only when you have the model printed by us.

Who it is for

A large figure or bust

Over 150 mm a cavity saves hundreds of grams; a model over 250 mm you also split into parts that fit the printer.

Resin printing

A solid part cracks and swallows litres. Hollow with a 2 to 3 mm wall and drain holes it prints cleanly and cheaply.

A paperweight or a stand

A cavity for sand or shot: a figurine, a flag stand or a base stands firmly and the print stays quick.

How it works

  1. Upload the model. Drop an STL, 3MF, OBJ or STEP of 5 to 1000 mm into the field, or click and choose the file.
  2. Choose the wall and the holes. Wall thickness 1.5 to 6 mm. Drain holes in the bottom with a diameter of 3 to 8 mm and a count, automatically up to four, or none.
  3. Hollow. Click "Hollow the model". It takes a few seconds, up to a minute for large models; the page says what is going on.
  4. Read what you save and go on. The volume of the cavity, the grams and the money saved, the x-ray of the wall. Then download the STL or the slicer project, or print with us.

Common questions

When does hollowing pay off and when not?

Leave a small FDM part solid: the slicer gives it 15 % infill and a cavity would save a few grams. It pays off for large figures and busts over 150 mm, always for resin printing (a solid part cracks and swallows litres), and for things you want to weight with sand or put something inside.

How thick should the wall be?

For FDM 2 to 3 mm; the wall is still printed with infill by the slicer, so it holds. For resin 2 to 3 mm, for large busts over 300 mm 3 to 5 mm. The tool does not go under 1.5 mm, such a shell prints badly.

What are the drain holes for and where will they be?

Always in the bottom of the cavity, the side the model stands on. In resin printing the uncured resin drains out through them and no vacuum forms; in FDM you shake the supports out of the cavity through them, or pour sand in. If you do not want them, switch them off and the cavity stays closed.

Does the outside change?

No. The outer surface stays exactly as it was; the cavity always ends at the chosen thickness under it, even in folds and thin places, where it simply does not form. The dimensions the calculator shows are the same before and after.

What happens to a model with holes in it?

Before measuring, the tool closes it the same way our farm does. If that fails, it says so; run such a model through the Model repair tool first and hollow it again.

How big a model can the tool handle?

Up to 1000 mm and 2 million triangles. Over 190 mm the measuring grid is coarser than 0.6 mm and the wall can differ in places by a tenth to half a millimetre; the tool says so with the result.

Where next

Looking for something else? See all Tools