matplace
ToolsPuzzle from a model

3D printed puzzle generator: a jigsaw from your model or photo, free

A flat model (a relief, a logo, a lithophane, a coaster) cut into a jigsaw: a grid of pieces with classic knobs, or with straight cuts and hidden pins in the sides, numbers engraved underneath and an optional tray.

File

Settings

How the pieces hold
25–45 %
0.1–0.4 mm

Free, a few seconds. The model stays, the puzzle opens as a new file.

Result

Sizes and parts appear with the preview.

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

The pieces print flat, face up, without supports; the knobs have 0.2 mm of play, so they fit without sanding. The hidden pins of Ø 3 mm are a piece of their own. The tray prints separately and the puzzle goes into it.

How the puzzle is made, how big the pieces should be and what it costs

The tool cuts a flat model into a jigsaw: a grid of 2 × 2 to 8 × 8 pieces with classic knobs, a head and a neck that fit together with 0.2 mm of play. A relief from a photo, a logo, a lithophane or a coaster from our tools suits it, or anything flat up to 25 mm; a taller model gets hidden Ø 3 mm pins in the sides instead, because a knob would not slide into thick plastic. The knobs and their directions are laid out by the tool; the pieces at the rim follow the model's outline. The number of every piece is engraved underneath, so the puzzle can be put together without the picture, and a tray with a 6 mm rim can be added for the finished puzzle to drop into. A model that is not closed is closed first; a piece that would fall apart because of a hole keeps its biggest bit, and the tool says so.

An example from the production calculator (28 October 2026, PLA): the round 100 mm coaster with the snowman from the Coaster tool cut into 3 × 4 pieces with knobs and numbers underneath weighs 22.6 g and prints in 1 h 3 min (calculation /c/wnr4wkkungpz); the pieces print together side by side and every piece can have its own colour when ordering. The puzzle opens as a new file: have it printed by us, or download the pieces one by one or as a project for your slicer, free and without registration. The tool itself is free.

Before you order

How much does a puzzle cost from you?

The 100 mm coaster cut into 3 × 4 pieces weighs 22.6 g and prints in 1 h 3 min (PLA); you see the price in the calculation before you order anything. The tool is free, you pay only for the print; the price grows with the size of the model and the tray, not with the number of pieces.

Which model should I upload?

A flat one: a relief or a lithophane from a photo, a logo, a coaster from our tools, up to 25 mm high and at least 80 mm wide so that the pieces reach 25 mm. Your own STL needs a flat bottom; a model from a calculation comes here with one click.

How long do printing and delivery take?

The puzzle from the 100 mm coaster prints in 1 h 3 min, all pieces together. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).

Can every piece have another colour?

Yes, for a print from us you pick the colour of every piece when ordering, in one order; a puzzle from a coaster in colours keeps the colours of the picture and the pieces differ only by outline. At home print the pieces from two spools in turns.

Which age is the puzzle for?

Pieces of 25 to 40 mm with knobs of 0.2 mm play suit children from three years; for smaller ones choose a 2 × 2 or 3 × 3 grid and the tray the pieces drop into. PLA holds no plasticisers, but do not give pieces under 30 mm to small children.

Do I need an account?

Not for the cutting or the download. You need one only when you have the puzzle printed by us; that is paid from credit topped up by card.

Who it is for

A photo as a puzzle

A relief from a photo, 200 × 150 mm, cut into 6 × 5 pieces of about 33 mm, with a tray.

A company logo for customers

A 120 mm logo as a 4 × 3 puzzle in two colours, ten pieces of the same design.

A gift for a child

A coaster in colours or an ornament from a drawing as a 3 × 3 puzzle with big pieces and a tray.

How it works

  1. Upload a flat model. Drop a model into the field or click to choose a file: STL, 3MF, OBJ or STEP, best a relief, a logo, a lithophane or a coaster up to 25 mm high. A model from our tools comes here straight from its calculation.
  2. Choose the grid and the joints. Rows and columns, jigsaw knobs (the size of the head and the play) or hidden pins, numbers underneath and a tray.
  3. Make the puzzle. Click "Make the puzzle". It takes a few seconds; you see the pieces in the preview, each in its colour, and the tool says how big they are.
  4. Order the print, or download. Download the pieces one by one or as a project for your slicer, or have them printed by us; the tray and the pins are pieces of their own.

Common questions

How big should the pieces be?

At least 12 mm, better 25 to 40 mm: knobs of that size print reliably and the pieces are easy to handle. A 100 mm coaster gives about 33 × 25 mm at 3 × 4 pieces; a 200 mm relief takes 6 × 6. Smaller pieces are refused.

Will the knobs hold, or will the pieces fall apart?

The knobs have 0.2 mm of play (0.1 to 0.4 can be set), which on a usual printer with a 0.4 mm nozzle gives a firm but separable joint. Too tight: more play; too loose: less. The head of the knob can be 25 to 45 % of the piece.

When should I choose hidden pins?

When the top is to stay without knobs, as on a lithophane or a logo, or when the model is taller than 25 mm. The pins of Ø 3 mm are in the file as a piece of their own; the pieces go onto them and are glued.

Can I make a puzzle from a photo?

Yes, through two tools: first turn the photo into a relief or a lithophane in the Relief and lithophane tool, or into a coaster in colours, and send the finished model here. A puzzle from a lithophane is put together against a window, a puzzle from a coaster has colours.

What is the tray for?

A tray with a 6 mm rim and a 1.5 mm base following the model's outline; the finished puzzle drops into it with play and can be displayed or hung. It prints as a piece of its own.

How do I print the puzzle at home?

The pieces flat, face up, without supports, 0.2 mm layers, PLA; the slicer project has them laid out side by side. For a coaster in colours the filament changes at the colour heights stay in. The tray prints bottom down.

Where next

Looking for something else? See all Tools