matplace
ToolsCoaster with a picture

Custom coaster generator for 3D printing: your photo or drawing in filament colours

A coaster with your own picture: round, square or hexagonal. We turn a photo or a drawing into the colours of the filaments we have on the farm.

Input

Start from a preset
Picture

PNG, JPG, WebP or SVG. A drawing with a few solid colours comes out best; from a photo we pick the main colours.

0–100
0–1 mm
Adjust the photo (contrast, brightness, saturation)
50–150 %
50–150 %
0–200 %
Or a name instead of a picture
Symbols
Typeface of the text (30)

Sans serif

Serif

Handwritten

Display

Typewriter and pixel

Decoration

A relief from a photo or a logo on the front or the back. You can add several. Texts are written in the step Input.

Size

Shape
Size
80–120 mm
3–6 mm
0–4 mm

Colours

1–8

0.2–0.8 mm

Material and quantity

A finished print, as an examplelib:colour/snowman

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

It prints flat, without supports. PLA is fine for cold and warm drinks; a mug straight from the stove does not belong on it, because PLA softens at about 55 °C. For hot dishes choose PETG.

How the coaster is made, how many colours it takes and what it costs

The tool makes a coaster with your picture: a circle, a square or a hexagon 80 to 120 mm wide and 3 to 6 mm thick. Upload a PNG, JPG, WebP or SVG, pick a motif from the library, or type a name. A whole photo fills the coaster up to the frame, a cut-out motif sits in the middle. The picture is reduced to 1 to 8 colours of filaments we have in stock on the farm, and the colours rise above the base in steps, 0.4 mm each by default, so a glass stands without trouble. Add grooves underneath so that the coaster does not slide on a wet table, a frame of up to 4 mm round the picture or a bevelled edge. A fully flat top comes with "Colours flush with the surface", which needs a printer that swaps filament.

An example from the production calculator (14 November 2026, PLA): a square 100 mm coaster with the Matplace logo, 4 mm thick, with grooves underneath, weighs 26 g, prints in 42 minutes and its print with us comes to 80 CZK. A set of four round coasters with the snowman from the library cost 170 CZK on 28 October 2026 (calculation /c/57k7ndo2ibxo), because the setup is paid once. Our farm prints up to four colours in one print, the base and three more; you confirm the spool of each colour when ordering. The model and the slicer project with the colour changes download free, without registration.

Before you order

How much does a coaster cost from you?

A set of four round 100 mm coasters costs 170 CZK (PLA, without delivery, calculation of 28 October 2026). The price grows with the thickness and the number of pieces; you see it before you order anything.

Which shape and size should I choose?

For a glass or a mug a circle of 90 to 100 mm is enough, for a pint glass a square of 100 to 110 mm; hexagons fit side by side as a set. A thickness of 4 mm is plenty, 6 mm looks more solid.

How long do printing and delivery take?

One coaster prints in 40 minutes, a set of four proportionally longer. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).

How do I clean the coaster?

Wipe it with a damp cloth or rinse it in lukewarm water; not in the dishwasher, PLA would warp at 60 °C. The colours are plastic, they neither wash off nor fade.

Does it suit a company gift with a logo?

Yes. Upload the logo as an SVG in one to four colours, pick the shape and the quantity; the price per piece falls with the count. Different motifs in one set are different designs, each ordered on its own.

Do I need an account?

Not for the design or the download. You need one only when you have the coasters printed by us; that is paid from credit topped up by card.

Who it is for

A set for the table or a café

Four to six 100 mm coasters with the same motif and grooves underneath, PLA.

A gift with a photo

A round coaster with a photo over the whole face, 6 to 8 colours, a bevelled edge.

A company logo

A square coaster with the logo from an SVG in two colours, 20 pieces for the meeting room.

How it works

  1. Upload a photo or a drawing. Upload a picture, pick one from the library, or reuse one you uploaded earlier. For a whole photo switch the background removal off; if you leave it on, only the motif in the middle stays.
  2. Pick the shape and size. A circle, a square or a hexagon. Set the width, the thickness and a frame of up to 4 mm round the picture, plus a bevelled edge and grooves underneath if you want them.
  3. Tune the colours. Choose the number of colours and give each a filament in the colour window. Set how much higher each colour is (0.2 to 0.8 mm); you can also join two colours into one.
  4. Order the print or download. The size is shown next to the preview; the calculation after "Continue" shows the exact price and print time. For a set, just set the quantity. The model and the slicer project download free, without registration.

What the tool can make

Square coaster 100 mm wide with the Matplace logo, a black rim and grooves underneath: 26 g, 42 minutes, 80 CZK.
Square coaster 100 mm wide with the Matplace logo, a black rim and grooves underneath: 26 g, 42 minutes, 80 CZK.
Hexagonal coaster, 95 mm, with a paw, a 2 mm frame, four colours.
Hexagonal coaster, 95 mm, with a paw, a 2 mm frame, four colours.
Square coaster, 100 mm, with a photo over the whole face, 6 colours, bevelled edge.
Square coaster, 100 mm, with a photo over the whole face, 6 colours, bevelled edge.

Common questions

Will a glass stand level on the coaster?

Yes. By default the colours are stepped by 0.4 mm and a glass stands on them without trouble. For a fully flat top use the option "Colours flush with the surface", which only a printer that changes filament by itself (AMS, MMU, ACE) can print.

What is the coaster printed from, and does it take a hot mug?

We recommend PLA: it is fine for cold and warm drinks but softens at about 55 °C. For a mug straight from the stove choose PETG. The coaster prints flat and without supports.

Which photo comes out well on a coaster?

A drawing, a logo or a photo with a few solid colours works best; a portrait reduced to 4 to 8 colours comes out poster-like. For a whole photo switch the background removal off, otherwise only the motif in the middle stays. Details under 0.8 mm merge.

What are the grooves underneath for?

They keep the coaster from sliding on a wet table, and a drop under it cannot form a suction cup. The grooves are optional and add no print time.

How do I order a set of coasters?

A set is the same coaster in several pieces: just set the quantity, and the price per piece falls because the setup is paid once. Coasters with different motifs are different designs, each ordered on its own.

How many colours do you print, and how do I print at home?

From us up to four in one print: the base and three colours on top of it; you confirm the spool of each when ordering. At home any printer prints a design with more colours: the colours lie one on another and the project for OrcaSlicer, Bambu Studio and PrusaSlicer holds the filament changes at the right heights.

Where next

Looking for something else? See all Tools