matplace
Tools3D map of a city or a landscape

3D printed map of any city from its name

Type a city, a village or a place and get a 3D map to print: the buildings, streets and water of OpenStreetMap, or the relief of a landscape from height data. Exact, within a minute, free and without an account.

Place

The name of a city, a district, a street or a landmark; or coordinates. The chosen place is the middle of the map.

What is printed
Range of the map

The side of the square round the middle. A city up to 2 km, a landscape up to 20 km.

Settings

Style
Plate
80–250 mm

The side of the plate, frame included. The scale follows.

3–10 mm
3–15 mm
Buildings
3–30 m

Real metres. Only for buildings OpenStreetMap gives neither a height nor a number of floors for.

Roofs

Roof shapes and church towers as OpenStreetMap has them; a house without a word gets a gabled roof. In the print a roof is at least 0.8 mm high.

Relief
1–3 ×

How many times the heights of the terrain are stressed. 1× is the true ratio; gentle country looks better at 2×.

On the map
Roads and paths

From motorways to footpaths, each as wide as its kind. Raised ones stand 0.6 mm above the plate in the second colour, sunk ones lie 0.6 mm in it.

Colours

The colours lie one above the other by height: the plate, the roads from its top, the buildings above them. The 3MF project carries both changes, the STL is one solid.

The relief prints in the colour of the terrain on the plate: one filament change at the top of the plate. Water and roads are shaped in the surface; the picture gives them their colour.

Material and quantity

The name of a city, a district, a street or a landmark; or coordinates. The chosen place is the middle of the map.
Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

A map prints flat without supports. A city has three colours one above the other: the plate, the roads and the buildings; on our farm the filament changes by itself, the project for your printer carries the changes. A picture of a map cannot be uploaded: name the place.

Data © OpenStreetMap contributors (ODbL) · Heights: Mapzen / AWS Open Data

What the map contains, how it prints in three colours and where the limits are

Type a city, a town, a district or a landmark, pick the extent and you get the map as a thin plate to print. A city has buildings with their real heights from OpenStreetMap (where a height is missing, the one you enter applies), streets by kind from motorways to footpaths, rivers and ponds sunk into the base, railways and parks. A landscape is a terrain relief from Mapzen elevation data at about 30 m resolution with adjustable exaggeration, with water and roads on the surface and villages as low blocks. No artificial intelligence guesses anything: the data is exact, its date is on the map, and the model is ready within a minute. The extent of a city is 500 m, 1 km or 2 km, of a landscape 2 to 20 km; the plate is 80 to 250 mm to suit the bed, the scale is computed and shown, and a raised name goes on the frame. In the Miniature style the buildings have rounded corners and are half as high again; the Sleek style keeps exact edges and real heights. Before the build you see a preview of the area from above.

An example from the production calculator (18 October 2026, PLA+): the Old Town of Prague, a 500 m square on a 150 mm plate (scale about 1 : 3,300), Sleek style, weighs 85 g, prints in 3 h 42 min and costs 240 CZK (about 10 EUR) from us in one colour, without delivery. The map prints flat without supports. The base, the roads and the buildings are three colours one above the other: on our farm the filament changes by itself at two heights, the 3MF project for OrcaSlicer and PrusaSlicer carries the changes, and the STL is one body for a single-colour print. Without an account you make three maps a day, with an account twenty; the preview of the area does not count.

Before you order

How much does a map cost from you?

The Old Town of Prague, 500 m on a 150 mm plate, came to 240 CZK in one colour (85 g, without delivery, calculation of 18 October 2026). You pick the colours of the base, the roads and the buildings at the order; you see the price before you order anything.

Which extent should I choose?

For a centre or a district 500 m, for a small town 1 km, for a big city 2 km; on a 150 mm plate of a kilometre a 20 m building is 3 mm high. Choose a larger area as a landscape of 2 to 20 km, where the terrain relief is the main thing and towns are low blocks.

How do I print the map at home?

Flat, without supports, 0.2 mm layers. The 3MF project for OrcaSlicer and PrusaSlicer carries two filament changes (roads, buildings); the printer pauses, you swap the spool and the print goes on. The STL is one body for a single-colour print.

How long do printing and delivery take?

A 150 mm map prints in about 3 h 42 min. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).

My town has no building heights in the map. What then?

Buildings without data get the height you enter, 8 m for family houses say. The preview of the area shows which buildings and streets OpenStreetMap has; anyone can add what is missing to OpenStreetMap, and the map takes it over once the data is refreshed.

What goes on the frame?

A raised name you enter: the name of the city, a street or a dedication. The frame can also be switched off, and the plate then ends at the edge of the map.

Who it is for

A gift of a home town

The centre where someone grew up or where the wedding was: 500 m on a 150 mm plate with the name on the frame, in three colours.

A district, a campus, a site

For architects, schools and site managers: buildings with real heights and streets by kind, within a minute and without drawing.

A landscape for a trip

A hill, a dam or a valley as a relief with exaggeration, with roads and water on the surface; 2 to 20 km on one plate.

How it works

  1. Enter the place. The name of a city, a district, a street or a landmark; or coordinates. Pick the place you mean and choose a city or a landscape and the extent: a city 500 m to 2 km, a landscape 2 to 20 km.
  2. Look at the preview and set the map. The preview of the area shows the buildings, roads, water and green as they will print. Choose the style, the plate size, the frame with the name, for a city the height of buildings without data and raised or sunk roads, for a landscape the exaggeration.
  3. Pick the colours. The base, the roads and the buildings, or the base and the terrain, each in its own colour. The colours lie one above the other by height, so any printer with a filament change can do them.
  4. Create the map and print or download. The model is built on the server, a 1 km city within half a minute. Then you see the dimensions; the exact price and a print from us are one step on, the STL and the 3MF project with the changes are free to download.

What the tool can make

A 500 m city on a 150 mm plate, Sleek style: buildings by height, main streets, a brook with a pond, a railway and a frame with the name; 85 g, 3 h 42 min.
A 500 m city on a 150 mm plate, Sleek style: buildings by height, main streets, a brook with a pond, a railway and a frame with the name; 85 g, 3 h 42 min.
The same place in the Miniature style: rounded buildings half as high again, wider streets, a park sunk into the base.
The same place in the Miniature style: rounded buildings half as high again, wider streets, a park sunk into the base.
A 5 km landscape with a hill in the middle, exaggeration 2×, on a 150 mm plate.
A 5 km landscape with a hill in the middle, exaggeration 2×, on a 150 mm plate.

Common questions

Where does the data come from and how exact is it?

Buildings, streets, water and railways from OpenStreetMap, the map that people all over the world keep up; in cities it is very complete, building heights where someone recorded them (otherwise the height you enter applies). Terrain heights from Mapzen data (AWS Open Data) at about 30 m resolution. The date of the data is on the map.

How big a city fits?

A square of 500 m, 1 km or 2 km around the centre. On a 150 mm plate a kilometre is at a scale of about 1 : 7,000 and a 20 m building is 3 mm high. A bigger city on one plate would have buildings smaller than the nozzle; for a large area choose a landscape.

How do the three colours print?

The base in the first colour, the roads from its top edge in the second, the buildings above them in the third: two filament changes by height. Our farm does them by itself, the 3MF project for OrcaSlicer and PrusaSlicer carries the changes. One colour works too: the STL is one body.

Can I upload a picture of a map?

No. From a picture one could only guess; from the name of the place you get exact buildings and streets. If we cannot find the place, enter coordinates, from Google Maps for instance.

May I sell the map?

Yes. OpenStreetMap data is under the ODbL licence: you can print, give away and sell the model, just credit "© OpenStreetMap contributors". Mapzen elevation data is free to use.

How many maps can I make?

The map services are public, so three maps a day without an account, twenty with one. The preview of the area does not count.

Where next

Looking for something else? See all Tools