Custom fridge magnet from a photo or a picture, 3D printed
A fridge magnet from a picture, a photo or a text. The back has a pocket made exactly for your magnet, the front has the colours of our filaments.
Material and quantity
A finished print, as an examplelib:colour/paw-badge
On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.
It prints face up, with the magnet pocket down, without supports. Glue the magnet in with superglue, or choose the press fit. Magnets are not part of the print. With flush colours it prints face down and the magnet pocket is on top.
How the magnet is made, which magnet goes in it and what it costs
The tool turns a picture into a fridge magnet. Upload a PNG, JPG, WebP or SVG, pick a motif from the library, or type a name. The picture is reduced to 1 to 8 colours of filaments we have in stock on the farm; the background of a photo goes by itself and the magnet then follows the outline of the motif, or it is a circle or a rectangle with the whole photo. Width 40 to 100 mm, thickness 3 to 6 mm, a frame of up to 3 mm round the picture, a bevelled edge if you like. The back has a pocket for a magnet in the middle: pick a common disc magnet from Ø 6 × 2 to Ø 20 × 3 mm, or enter your own size, and glue it in, press it in, or leave a hole right through; for self-adhesive magnetic sheet choose the version with no pocket. If the magnet is tall for the chosen thickness, the tool thickens the base so that four layers of plastic stay over it. Magnets are not included.
An example from the production calculator (28 October 2026, PLA): the paw from the library in a 60 mm circle, 3 mm thick, with a pocket for a Ø 10 × 2 mm magnet, weighs 7 g and prints in 14 minutes (calculation /c/gob4imtsfmor). Several pieces of the same design go in as the quantity and the price per piece falls; magnets from the photos of the whole family are different designs. Our farm prints up to four colours in one print, the base and three more; you confirm the spool of each colour when ordering. The STL, a ZIP with one STL per colour and the slicer projects download free, without registration.
Before you order
How much does a magnet cost from you?
The 60 mm paw with a pocket for the magnet weighs 7 g and prints in 14 minutes (PLA); you see the price in the calculation before you order anything. Several pieces of the same design go in as the quantity and the price per piece falls; the magnet is not in the price.
Where do I buy the magnets?
Neodymium disc magnets of Ø 10 × 2 or Ø 12 × 3 mm are sold by hardware stores and online shops in tens; one is enough for a piece up to 60 mm, for 100 mm pick a bigger one such as Ø 20 × 3 mm. Enter the size of the magnet you really have.
How long do printing and delivery take?
A 60 mm magnet prints in 14 minutes. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).
Will it hold paper on the fridge?
A neodymium Ø 10 × 2 mm magnet in a 60 mm piece holds a few sheets of paper; for a thicker bundle choose Ø 12 × 3 or Ø 15 × 3 mm. On stainless doors without an iron layer a magnet does not hold, test them with an ordinary magnet.
Does it suit a gift or a company giveaway?
Yes: a child’s photo for grandma, a company logo for customers or wedding magnets for the guests; the same design in 20 pieces comes cheaper per piece. Different photos are different designs.
Do I need an account?
Not for the design or the download. You need one only when you have the magnets printed by us; that is paid from credit topped up by card.
Who it is for
A photo on the fridge
An 80 mm rectangle with a photo over the whole face, 6 to 8 colours, a Ø 12 × 3 mm magnet glued in.
Wedding or company magnets
A logo or names in two colours, 50 mm, 20 to 50 pieces of the same design.
A child’s drawing
A photographed drawing as a magnet following its outline, 60 mm, 4 colours.
How it works
- Upload a picture or a photo. The background is removed automatically and the shape then follows the outline of the motif. To keep the whole photo, switch the background removal off. Sliders adjust the contrast, brightness and saturation of a photo.
- Choose the shape and size. The shape follows the picture, or is a circle or a rectangle. Set the width, the thickness, a frame of up to 3 mm round the picture and, if you like, a bevelled edge.
- Pick the magnet and its mount. Choose the magnet size and how it is held: a pocket for gluing with a clearance of 0.1 to 0.3 mm, a press-fit pocket, a hole right through, or no pocket for magnetic sheet.
- Order the print or download. Next to the preview you see the size; the calculation after "Continue" shows the exact price and print time. The STL, a ZIP with one STL per colour and the slicer projects download free, without registration.
What the tool can make
Common questions
Which magnets fit the pocket?
There are presets for the common disc magnets Ø 6 × 2, 8 × 3, 10 × 2, 12 × 3, 15 × 3 and 20 × 3 mm. Your own size can be 4 to 30 mm in diameter and 1 to 6 mm high. Magnets are not part of the print; a neodymium Ø 10 × 2 mm is enough for a 60 mm piece.
How does the magnet stay in?
In a pocket for gluing you glue it in, for example with superglue; the clearance round the magnet can be set from 0.1 to 0.3 mm. Into a press-fit pocket you push the magnet. A hole right through passes through the whole piece, so the magnet may show from the front.
Which photo comes out well?
A drawing, a logo or a photo with a clear motif on a calm background; the tool removes the background and the magnet follows the outline. For a portrait keep a circle or a rectangle with the whole photo and 6 to 8 colours, it comes out poster-like. Details under 0.8 mm merge.
What if the magnet is too high for the chosen thickness?
The tool thickens the base by itself so that four layers of plastic stay over the magnet, and shows the new thickness. If the magnet does not fit inside the shape, it tells you to increase the width or choose a smaller magnet.
What is it printed from, and how do I print it at home?
We recommend PLA. It prints face up, with the pocket down and without supports, 0.2 mm layers; the pocket is in the base, so the printer bridges a few millimetres over it. For places where it gets warm, choose PETG.
Do you print the magnet in colour?
Yes, in up to four colours in one print: the base and three colours on top of it. You confirm the spool for each colour when ordering; the ones from the design are preselected. A design with more colours downloads free; the colours lie one on another, so any printer prints it by swapping filament at the heights the project contains.
Where next
Looking for something else? See all Tools
