matplace
ToolsFilament art

Filament painting generator: a picture or a photo as layers of coloured filament

We turn a picture or a photo into filament colours and make a picture for the wall of them: one print with the colours one above another, or a layered picture of plates in a frame, every colour a plate of its own.

Input

Picture

PNG, JPG, WebP or SVG. A drawing with a few solid colours comes out best; of a photo we take the main colours.

What kind of picture it is

1–5 mm

Nothing in the picture will be smaller. A larger value gives bigger, cleaner areas and a faster print. Photos and paintings look best with 5–6 colours and a detail of 2–3 mm.

0–100
0–1 mm
Adjust the photo (contrast, brightness, saturation)
50–150 %
50–150 %
0–200 %

Size

How it is made
Frame
Shape of the base
50–250 mm
50–250 mm
0–20 mm
6–20 mm
1.5–3 mm
0–5 mm
0.8–3 mm
0.4–1.2 mm

Colours

1–8

Material and quantity

A finished print, as an examplelib:colour/snowman

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

Layered picture: print every plate in its colour, then glue them in the order of the guide, back plate first. One print with the colours as steps we print on the farm in one go; you pick the colours when ordering (four at most).

Two ways to make the picture, and what it costs

The tool reduces a picture or a photo to 1 to 8 colours of filaments we really have in stock on our print farm and builds a picture for the wall of them, 50 to 250 mm wide. By default it is a layered picture: every colour is a plate of its own, 1.5 to 3 mm thick, and the plates stack one behind another like a paper cut; the back one carries the whole silhouette, the front one only its colour. Spacer posts of 2 to 5 mm between the plates give the picture depth and shadow; for a thin picture the plates lie flat. Add a round or square frame with a slot for a nail and, if you like, room for an LED strip. The second way is one print: a base plate with the colours 0.4 mm one above another, one filament per layer, so any printer prints it by swapping the filament at the heights the project names. The background of a photo goes by itself; for a photo over the whole area you switch that off. For every colour you see the spool the tool chose and can swap it for another from the catalogue, reorder the colours or merge two.

An example from the production calculator (28 October 2026, PLA): the snowman from the library as a layered picture of four plates in a round 120 mm frame weighs 105.6 g, prints in 2 h 46 min and costs 200 CZK (about 8 EUR) from us without delivery (calculation /c/tmwh0ok9ixpv); you pick the colour of every plate and of the frame when ordering, in one order. The gingerbread man as one print 120 mm wide, a base and three colours stacked, weighs 15.9 g and prints in 26 minutes (calculation /c/etcdmot38mpy). Next to the preview is the guide: the plates in order from the back to the front, each one drawn. Download every plate as its own STL, or the whole design as a project for your slicer, free and without registration.

Before you order

How much does the picture cost from you?

The snowman of four plates in a round 120 mm frame costs 200 CZK (PLA, without delivery, calculation of 28 October 2026). The price grows with the width and the number of plates; you see it before you order anything.

Which picture should I upload?

A drawing or a logo with a few solid colours, a PNG or JPG with a clear background, or an SVG. A photo the tool simplifies to its main colours in "painting" mode; a greyscale portrait is better off as a lithophane.

How long do printing and delivery take?

The snowman prints in 2 h 46 min, the gingerbread man in 26 minutes. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).

How do I print the picture at home?

Flat, without supports, 0.2 mm layers, PLA. Every plate from its own spool; for one print the project holds filament changes at the heights of the colours, the printer stops and you swap the spool.

How is the picture assembled and hung?

Glue the plates by the guide from the back to the front with superglue; the posts go under the plate in front of them. The frame has a slot for a nail in its back; with room for an LED strip there is a slot for the cable at the bottom.

Do I need an account?

Not for the design or the download. You need one only when you have the picture printed by us; that is paid from credit topped up by card.

Who it is for

A child’s drawing on the bedroom wall

A photographed drawing as a layered picture of 150 to 200 mm from 4 to 6 plates in a frame; the bold lines of a drawing suit the layers.

A company logo at the reception

The SVG of the logo as plates in a square 250 mm frame with room for an LED strip; you pick the colours from our spools to match the brand.

A gift from a photo or a motif

A poster-like picture from a photo in "painting" mode, 180 mm, or a motif from the library as one print without gluing.

How it works

  1. Upload a picture. Upload a picture, pick one from the library, or reuse one you uploaded earlier. The background goes by itself; for a photo that is to fill the whole area, switch the removal off.
  2. Choose how it is made. A layered picture of plates with a frame, or one print with the colours one above another. Set the width, the thickness of the plates and the gap between them, the frame and room for an LED strip if you want it.
  3. Fine-tune the colours. Choose how many colours and give each one a filament from our catalogue. Colours can be moved forward or back, or two merged into one; for a photo switch the reading to "painting".
  4. Order the print, or download. Next to the preview you see the size; the calculation after "Continue" shows the exact price. Download every plate as its own STL, or the whole design as a project for your slicer, free and without registration.

What the tool can make

A snowman as a layered picture of four plates in a round 120 mm frame: 105.6 g, 2 h 46 min, 200 CZK.
A snowman as a layered picture of four plates in a round 120 mm frame: 105.6 g, 2 h 46 min, 200 CZK.
A smaller picture of 100 mm from three plates without a frame, flat: 25 g, 46 minutes.
A smaller picture of 100 mm from three plates without a frame, flat: 25 g, 46 minutes.
A gingerbread man as one print 120 mm wide: a base and three colours 0.4 mm one above another, 15.9 g, 26 minutes.
A gingerbread man as one print 120 mm wide: a base and three colours 0.4 mm one above another, 15.9 g, 26 minutes.

Common questions

How is a layered picture assembled?

Print every plate in its colour, then glue them by the guide from the back to the front. The spacer posts are part of the plate and go under the plate in front of them. Superglue is enough. The frame prints bottom down and the plates are glued inside it.

What if I only have a single-colour printer?

The layered picture is made for it: every plate is a single-colour print. One print with the colours as steps works too; the project holds filament changes at the right heights, the printer stops and you swap the filament. A printer with AMS, MMU or ACE swaps the spools itself.

Which pictures come out best?

Drawings and logos with a few solid colours. Of a photo the tool in "painting" mode takes the main colours and simplifies the areas to millimetres, so the result is poster-like; for a greyscale portrait a lithophane is the better choice. Lines thinner than 0.8 mm would break as a plate of their own, so the tool gives them to the colour behind them and says so.

What frame, and how does it hang?

Round or square, 6 to 20 mm wide, with a slot for a nail in the back. With "Room for an LED strip" the plates stand 10 mm further from the back and there is a slot for the cable at the bottom; the strip is yours to buy.

How does it differ from HueForge and from a lithophane?

HueForge blends shades through the translucency of thin layers and needs filament changes set precisely in the slicer; our one print stacks solid colours, so it looks the same on every printer and you see the result beforehand. A lithophane has one colour and the picture comes from thickness against light; filament art is in colour without any light.

What is the picture printed from, and in which colours?

From PLA, which has the widest choice of colours and prints flat without supports. The colours are spools we really have in stock, so the print looks like the preview. For a print from us you pick the colour of every plate and of the frame when ordering, in one order.

Where next

Looking for something else? See all Tools