matplace
ToolsLid, plug, cover

Threaded cap, lid or plug generator for 3D printing, made to measure

Choose how the part should hold and type what you measured. We add the clearance, so give the real size of the neck or the opening.

verified by printing October 1, 2026

Input

Start from a preset
How it holds
Shape
Top
Seal
Thread

Size

What you measured
5–200 mm
8–200 mm
0–220 mm
4–60 mm
0.5–6 mm
4–195 mm
0–3 mm
Wall thickness and more

Colours

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

Prints with the flat side on the bed, opening up, without supports; a round top edge makes a slight overhang at the bed, a printer manages up to 3 mm. The thread is always round, even in an angular cap, and does not seal by itself: for liquids choose the sealing lip or a liner. Metric threads are the coarse series (M10 × 1.5…); this makes a nut or a cap for a bolt, not the bolt. Print plugs and springy caps in PETG. The print is not meant to touch food without a liner; try a thread on one piece first.

How the missing cap is made, what it fits and what it costs

The tool builds a missing lid, plug or cover from what you measure. The part pushes over a rim, plugs into an opening or screws onto a thread; the shape is round, rectangular or hexagonal, the diameter or width 5 to 200 mm, the height 4 to 60 mm. For a thread you pick the 28 mm PET bottle, a coarse metric thread from M6 to M30, or enter your own diameter and a pitch of 0.5 to 6 mm; the result is always a cap or a nut for an outer thread, the tool does not make the bolt. The tool adds the clearance, so you enter the real size. For liquids add a sealing lip into the mouth or a bed for a liner, a knurled rim round the outside and a rounded top edge. The preview shows the part from outside and in a cut view and states which size it fits.

An example from the production calculator (28 October 2026, PLA): a screw cap for a 28 mm PET bottle with a sealing lip, thread 12 mm high, weighs 5.7 g and prints in 22 minutes (calculation /c/5omcbkke1541). An end cap for a rectangular 36 × 16 mm profile, plugged in 15 mm, weighs 4.7 g and prints in 15 minutes (calculation /c/ldniassche8t); a push-on lid for a jar with a 70 mm neck weighs 17.8 g and prints in 39 minutes (calculation /c/hgabcfckkauy). For several pieces the price per piece falls, the setup is paid once. The model downloads free as an STL or a project for your printer; it prints without supports.

Before you order

How much does a cap cost from you?

A cap for a PET bottle weighs 5.7 g and prints in 22 minutes, a push-on lid for a 70 mm jar weighs 17.8 g and prints in 39 minutes (PLA); you see the price in the calculation before you order anything. Several pieces of the same cap go in as the quantity and the price per piece falls.

What if I do not know the pitch of the thread?

Measure the length of ten threads and divide it by ten, or try a preset: PET bottles have 2.7 mm, metric threads the pitch of the M6 to M30 series. For an unknown thread print one piece before ordering more.

How long do printing and delivery take?

The PET bottle cap prints in 22 minutes, the jar lid in 39 minutes. We ship on the day the print finishes, on working days, and Packeta in Czechia usually delivers within 1 to 2 working days (to a pick-up point €4.00).

What if the cap does not fit?

Check that you entered the real size without clearance; the tool adds the clearance. If the part goes on stiffly, add 0.1 mm of clearance, if it is loose, take some off, and order the new piece from the same design.

Will the cap last outdoors and in heat?

For a garden tank, a barrel or a car choose ASA or PETG; PLA softens in the sun and above 55 °C and the thread lets go. Indoors PLA is enough.

Do I need an account?

Not for the design or the download. You need one only when you have the cap printed by us; that is paid from credit topped up by card.

Who it is for

A lost cap of a bottle or a canister

A screw cap for a 28 mm PET bottle, or your own thread by the measured diameter and pitch, with a sealing lip.

End caps for profiles and tubes

Plugs for furniture tubes and caps for aluminium profiles by the inside size, five or ten at a time.

A lid for a jar or a canister

A push-on lid for a jar with a 70 mm neck with a bed for a liner, from PETG for the pantry.

How it works

  1. Choose how it holds. Pushed over the rim, plugged into the opening or screwed onto a thread. You can start from a preset such as "PET bottle (28 mm)", "Pipe plug" or "Profile end cap".
  2. Enter what you measured. For a push-on lid measure the outside of the neck, for a plug the inside of the opening, for a thread the diameter over the thread and the pitch. Enter the real size and add no clearance.
  3. Choose seal and shape. For liquids choose the sealing lip into the mouth or the bed for a liner. You can add a knurled rim, a domed top and a rounded top edge.
  4. Order the print or download. Check the preview and the cut view and continue to the precise price. Or download the model free for your own printer; for an unknown thread, try one piece first.

What the tool can make

Screw cap for a 28 mm PET bottle with a sealing lip, thread 12 mm high: 5.7 g, 22 minutes.
Screw cap for a 28 mm PET bottle with a sealing lip, thread 12 mm high: 5.7 g, 22 minutes.
End cap for a rectangular profile, opening 36 × 16 mm, plugs in 15 mm: 4.7 g, 15 minutes.
End cap for a rectangular profile, opening 36 × 16 mm, plugs in 15 mm: 4.7 g, 15 minutes.
Push-on lid for a jar with a 70 mm neck, 14 mm deep: 17.8 g, 39 minutes.
Push-on lid for a jar with a 70 mm neck, 14 mm deep: 17.8 g, 39 minutes.

Common questions

Will a screw cap be watertight?

A printed thread does not seal by itself, it only holds. For liquids choose the sealing lip into the mouth, which presses against the inside of the neck, or the bed for a liner of foam rubber or silicone. The liner is not part of the print.

Which threads can the tool make?

The 28 mm PET bottle (27.4 mm over the thread, 2.7 mm pitch), coarse metric threads from M6 to M30, and a custom thread with a pitch of 0.5 to 6 mm. The result is always a cap or a nut for an outer thread; the tool does not make the bolt.

How do I measure the neck or the opening?

With callipers: for a push-on lid the outside diameter of the neck, for a plug the inside of the opening at two places, for a thread the diameter over the crests and the distance between two neighbouring crests. Enter the real figure; the tool adds a clearance of 0.1 to 1 mm, which you can change.

How big can the part be?

The diameter or width of the neck can be from 5 to 200 mm and the height from 4 to 60 mm. The tool refuses a part that is too small, because it would not print sturdy; a cap over 200 mm does not fit the print bed.

Can I use the cap for food and drinks?

The print is not meant for direct contact with food. If the cap is for a drink or food, choose the bed for a liner and put a liner in it; the plastic itself should not meet the contents.

Which material, and how do I print it at home?

Plugs and caps that have to spring or are screwed often from PETG; for covers that carry no load PLA is enough. It prints top down, without supports, 0.2 mm layers; a thread comes out cleaner with 0.12 mm. If the cap goes on stiffly, add 0.1 mm of clearance.

Where next

Looking for something else? See all Tools