matplace
ToolsA holder for anything

Custom wall mount to 3D print

Measure the thing you want to put away and choose how the holder should hold it. We add the clearance around it.

verified by printing September 29, 2026

Input

Start from a preset
How it holds
Holes for hanging

Size

Size of the thing
10–300 mm
5–150 mm
15–150 mm
10–150 mm
0–40 mm
0–2 mm
Wall thickness and more

Colours

Material and quantity

Sizes and parts appear with the preview.

On the next page you pick the colour, the material and the print settings and ask for the price. Nothing is ordered or paid yet.

Prints without supports: the cradle and the pocket standing the way they hang on the wall, the hook and the clip lying on their side. Holes are teardrop-shaped so they print cleanly. Keyhole: the head of the screw in the wall goes through the wide hole, the holder slides down and hangs in the narrow slot. Rounded edges are bevelled on the side that lies on the bed. For heavier things and the clip choose PETG. Wall screws: 4 mm with a plug.

Which mounts the tool makes, how to measure and what a print costs

The tool makes a mount from the size of the thing you want to put away on a wall: a remote, a bottle, a tool, headphones, a broom. You pick one of four kinds: a cradle with a low front, a closed pocket, a hook for anything with a loop or a strap, or a clip that grips a round handle up to 60 mm across. You enter the real size of the thing (width 10 to 300 mm, thickness 5 to 150 mm) and the tool adds 0.8 mm of play around it by itself; the clip is a touch tighter instead. The mount is fixed with 4 mm screws and wall plugs, by hanging on a screw already in the wall, or with double-sided tape without holes. The preview shows the shape with its holes and sizes, and the model prints without supports.

An example from the production calculator (18 October 2026, PLA+): a cradle for a 50 × 22 mm remote, 70 mm high, weighs 27 g, prints in 1 h 12 min and costs 100 CZK (about 4 EUR) from us; a hook for headphones weighs 11 g and prints in 27 minutes; a clip for a 24 mm broom handle weighs 8 g and prints in 21 minutes, all without delivery. In 90 days 11 mounts went through the calculator. For light things PLA and tape are enough, for heavier ones choose PETG and screws; screws, plugs and tape are not part of the print. You download the model free as an STL or a project for your printer.

Before you order

How much does a mount cost from you?

A cradle for a remote, 27 g and 1 h 12 min of printing, costs 100 CZK (PLA+, without delivery, calculation of 18 October 2026). Several mounts in one order come cheaper per piece; you see the price before you order anything.

Which kind of mount for what?

The cradle for a remote, a phone or glasses, the pocket for a bottle, tools and pens, the hook for headphones, a bag or keys with a loop, the clip for the handle of a broom, a mop or a rake. The presets set the sizes of common things, your own sizes overwrite them.

How long do printing and delivery take?

The clip prints in 21 minutes, the hook in 27 minutes, the cradle in 1 h 12 min. We dispatch on the day the print ends, on working days, and Packeta usually delivers within 1 to 2 working days in the Czech Republic (to a pickup point €4.00).

How do I fix the mount without drilling?

Switch the holes off and stick the mount on with double-sided tape; it carries only light things like a remote or headphones. Where a screw is already in the wall, choose hanging on a screw: the head passes through the wide hole and the mount slides down into the slot.

How do I print the mount at home?

Flat with the back on the bed, without supports; the downloaded project carries the settings of the calculation. For heavier things raise the number of walls or the infill in your slicer and print from PETG.

Do I need an account?

Not for the design or the download. You need one only when you have the mount printed by us; that is paid from credit topped up by card.

Who it is for

Remotes by the sofa

A 50 × 22 mm cradle on the side of a shelf or a side table, stuck on with tape; one for every remote.

Tools in the workshop and garage

Clips for handles and pockets for hammers from PETG on screws, sized to every piece.

Headphones at the desk

A 35 mm hook under the desktop or on the side of the monitor, the headphones out of the way.

How it works

  1. Measure the thing. Measure the width and the thickness of the thing, for a handle its diameter. Enter the real size without a reserve, the tool adds the play.
  2. Pick how it should hold. The cradle and the pocket embrace the thing, the hook is for anything with a loop or a strap, and the clip grips a round handle. You can start from a preset, "Remote" or "Headphones" say.
  3. Choose the fixing. Leave the screw holes on, or switch them off and stick the mount on with double-sided tape. The holes can be round, or keyholes for hanging on a screw in the wall.
  4. Order the print or download. Check the preview and go on to the exact price with "Continue". Or download the model free for your own printer.

What the tool can make

A cradle for a 50 × 22 mm remote, 70 mm high, for screws: 27 g, 1 h 12 min, 100 CZK.
A cradle for a 50 × 22 mm remote, 70 mm high, for screws: 27 g, 1 h 12 min, 100 CZK.
A hook for headphones, 35 mm wide, 45 mm deep, hook 25 mm high: 11 g, 27 minutes.
A hook for headphones, 35 mm wide, 45 mm deep, hook 25 mm high: 11 g, 27 minutes.
A clip for a 24 mm broom handle, 25 mm high, for screws: 8 g, 21 minutes.
A clip for a 24 mm broom handle, 25 mm high, for screws: 8 g, 21 minutes.

Common questions

How big a thing does the mount take?

The width of the thing from 10 to 300 mm and the thickness from 5 to 150 mm. The clip is only for round handles up to 60 mm across. A mount over 250 mm does not fit the bed of our farm; the calculation says so.

How much does the mount carry?

We state no load, it depends on the material, the screws and the wall. For heavier things choose a sturdy plastic (PETG) and screws in wall plugs. Double-sided tape carries only light things, a remote or headphones say.

Which screws do I need?

The holes are for 4 mm screws with wall plugs. Neither screws nor plugs are part of the print.

What does hanging on a screw in the wall mean?

The head of a screw already in the wall passes through the wide hole, the mount slides down and hangs in the narrow slot. You lift it to take it off. Handy where you do not want to drill new holes.

Should I add play to the sizes?

No. The tool adds 0.8 mm of play around the thing, which you can change from 0.3 to 2 mm. The clip is a touch tighter instead, so that it grips the handle; measure a handle with callipers, not by eye.

Does the mount last in a bathroom or outdoors?

In a bathroom or a garage choose PETG, which takes damp and heat; outdoors in the sun ASA. PLA is enough for a room or an office. You pick the material in the material comparison of the calculation.

Where next

Similar tools

Looking for something else? See all Tools