matplace
Y-Splitter for BambuLab AMS

Y-Splitter for BambuLab AMS

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only

About the model

Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay very cheap. https://www.amazon.com/s?k=PC4-M6 https://www.ebay.com/sch/i.html?_nkw=PC4-M6 Dont forget your PC4-M6 connector clip, to make sure the PFTE tube stays in place: https://makerworld.com/en/models/19421 Update: I've seen a lot of PLA makes, I highly suggest printing these in a material harder than what you normally print with, or the filament will grind out the model. It will take 6 month of printing but when it happens you are gonna sigh and dislike printing a second one. So make it in a material harder than PLA(assuming thats what you usually use) That way the splitter will grind the fillament instead, since its such minute it wont affect your printing, but after 6 month instead of having to replace the splitter you just have to blow away some dust.

Similar models