matplace
Y-Splitter Bambu Lab

Y-Splitter Bambu Lab

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only
Largest side
about 85 mm
Printing estimate
about 18 g of filament, 1 h 35 min
Price with us
from €4.00 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Summary A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to take up the filament better here. At the inlet to the printer, I used a pointed knife to slightly widen the PTFE tube in the direction of the AMS to improve the inlet. The existing M3 screws need to be replaced with longer ones. • PC4-M10 pneumatic connector, inner diameter: 4 mm • 2x M3 6mm Translated with www.DeepL.com/Translator (free version) Ein Splitter wie hier schon vorgestellt, aber nicht mit Magneten, sondern mit M3 Schrauben an vorhandenen Gewinden befestigt. Es gibt ihn in zwei Ausführungen. Einmal flach und einmal einen Arm um 90° in Richtung Spule gedreht, um hier das Filament besser aufnehmen zu können. Am Einlass zum Drucker habe ich mit einem spitzen Messer den PTFE-Schlauch in Richtung AMS etwas geweitet, um den Einlass zu verbessern. Die vorhandenen M3 Schrauben müssen durch längere ersetzt werden. • PC4-M10 Pneumatik Verbinder, Innendurchmesser: 4 mm • 2x M3 6mm

Similar models