matplace
Stranger Things Demogorgon

Stranger Things Demogorgon

by Christianb2 · Printables

Print it for yourself

The licence (CC BY-NC-SA (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-SA (non-commercial)
Largest side
about 150 mm
Printing estimate
about 185 g of filament, 8 h 40 min
Price with us
from €20.50 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Introduction This model was designed by my son for a 3D modeling course in high school. (He got 2nd place in the Senior Art Show!) It is his interpretation of the Demogorgon monster from the Netflix television series “Stranger Things”. (It is being uploaded with his permission.) Files This model is very support-intensive, but has been split apart to hopefully make things a little easier. • Display Bases and Labels • Demogorgon_round_base.stl: A round display base with “Stranger Things” embossed on the side. • Support needed? Yes, some support may be needed under the lettering. • Demogorgon_rectangle_base.stl: A rectangular display base with a sloping front to hold labels. • Support needed? No. • Demogorgon_base_label_v1.stl: Label with “Stranger Things” embossed 3 mm high. Can be printed in multi-colors. Intended to be glued to front of rectangular base. • Supports needed? No. • Demogorgon_base_label_v2.stl: Label with “Stranger Things” embossed 1.5 mm high. Can be printed in multi-colors. Intended to be glued to front of rectangular base. • Supports needed? No. • Demogorgon Models (without base) • Demogorgon_full_size.stl: Full size model. • Supports needed? Yes. • Demogorgon_split_head.stl: Split model of head only. • Supports needed? Yes. • Demogorgon_split_arms.stl: Split model of arms only. • Supports needed? Yes. • Demogorgon_split_legs.stl: Split model of legs only. • Supports needed? Yes. Printing You will need to print all Demogorgon models with supports. The split models are not necessarily easier to print, but they may make things more manageable. Recommend for better stability you print the base with more perimeters and percentage infill to make it heavier than the model. Assembly • Select a base of your choosing to display the Demogorgon model. For the rectangular base, glue one of the labels to the front. The bases and the labels are nothing “spectacular”, so feel free to create a base of your own, if you wish. • If you printed the split Demogorgon models, simply glue them together matching up the flat faces. • Glue the Demogorgon model to the base. Have fun!!

Similar models