matplace
Moon Lamp

Moon Lamp

by Kx · Printables

Print it for yourself

The licence (CC BY-NC-SA (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-SA (non-commercial)
Largest side
about 110 mm
Printing estimate
about 145 g of filament, 5 h 20 min
Price with us
from €14.60 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

hanging Moon Lamp variant Moon Globe 3 sizes available: Ø 140mm / Ø 175mm / Ø 200mm (Ø200mm version is not printable on the MINI) Hole for light bulb, diameter: 60 mm Print instructions • Infill: 100 % (The 3D model is a hollow object, infill 100% means print a solid shell) • Layer: 0,2 mm • Supports: No Base for E27 Light bulbs Print instructions • Infill: 5% - 10% • Layer: 0,2 mm • Supports: No The print must be paused twice to insert the M3 Nuts (check Photos). First pause after 5mm, second pause after 7,6mm. The pause is already setup in the 3mf and gcode files. Strain Relief Print instructions • Infill: 20% Honey Comb • Layer: 0,15 mm • Supports: No Additional required parts: • 4x M3 Nut • 4x M3x12 Screw • 1x E27 Ceramic Socket Bulb Holder, something like this • 1x Power Cord, something like this or that The picture is taken with a warm white light bulb, for a picture with a cold white light bulb please check the hanging Moon Lamp variant Credit for the Moon Lithophane goes to u/moononournation: https://www.thingiverse.com/thing:4102658/files Progressive Detail Moon Lamp : 23 Steps (with Pictures) - Instructables

Similar models