matplace
Map from the Princess Bride - Hueforge Print

Map from the Princess Bride - Hueforge Print

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only

About the model

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. If you're willing to do some maths, you can reduce print times by using a layer height modifier to print the base layers at a taller height. I printed this on a 0.4 nozzle, which sacrificed a bit of the detail in the lettering. You might be able to get away with a 0.2 nozzle but it might take a lot longer. This was a17 hour print on a 0.4 nozzle. Filaments Used: • PETG JAYO Black Transmission Distance: 0.3 • PLA+ eSun Grey Transmission Distance: 1.4 • PLA Sunlu Beige Transmission Distance: 8.2 • PETG JAYO White Transmission Distance: 6 Swap Instructions: • Start with Black • At layer #20 (0.92mm) swap to Grey • At layer #22 (1mm) swap to Beige • At layer #25 (1.12mm) swap to White for the rest.

Similar models