matplace
Lead Screw Cleaning Tool

Lead Screw Cleaning Tool

by Haix3D · Printables

Print it for yourself

The licence (CC BY-NC-ND (non-commercial, no derivatives)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-ND (non-commercial, no derivatives)
Largest side
about 95 mm
Printing estimate
about 18 g of filament, 1 h 32 min
Price with us
from €4.00 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Hey, since the cleaning with several paper towels has always annoyed me, I have designed this small but helpful tool. You just click it into the Lead Screw and move the Z axis completely. If the lead screws are very dirty, you can repeat the procedure. The tool fits all printers that have a standard 8mm lead screw installed. So basically with all common 3d printers. You should print the tool as fine as possible. The highest layer height should be maximum 0.2mm. The finer the part is printed, the better the cleaning effect. Perfect results are achieved with Bambu Lab 0.08mm layer height. Your printer must also be well calibrated so that the tool fits correctly into the lead screw. It is normal that the part must be clicked quite tightly. If you have any questions or suggestions for improvement, please let me know.

Similar models