matplace
Large Filament Spool Holder

Large Filament Spool Holder

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only

About the model

Boost MeIf you like this model, consider boosting me to help me bring more models in the future. Thank you :) This is a spool holder I've designed in order to accomodate large filament holders (up to 5kg weight, up to 30cm diameter). I've printed the bottom arms (2 pieces) and side panels (2 pieces) in PLA and the spindle in PETG as follows: • Side (either hollow or solid version): 10% infill (Gyroid or other high-strength pattern), 5 walls, 0.2mm. The part should be printed facing down (with the arm holes facing up), does not need support. • Arm: 10% infill (ZigZag), 5 walls, 0.2mm. The part should be printed facing down. • Spindle: 20% infill (Cubic Subdivision), 5 walls, 0,2mm. This part should be printed vertically, no need for supports. Use glue to fix the arms to the sides. Scale all parts to 95% on all dimensions, if you have a printer bed smaller than 250mm* 250mm. The design is very simple (took me about 30 minutes) but it works for me. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: No Resolution: 0.2 Infill: 10-20% Filament:Devil Design PLA, PETG Category: 3D Printer Accessories

Similar models