matplace
lampshade IKEA

lampshade IKEA

by Kemet · Printables

Print it for yourself

The licence (CC BY-NC (non-commercial)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC (non-commercial)
Largest side
about 110 mm
Printing estimate
about 45 g of filament, 2 h 36 min
Price with us
from €6.50 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Ceiling lampshede for IKEA ceiling cable HAVSDJUPI did reconstruction of my office and all the time- ceiling cables stayed unfinished - without any touch or personalization - but not any more. I created this basic lampshades inspired by golden ratio spiral that fit PRUSA MINI bed size (yep, i got one) Printed in VASE mode - i used 0.4mm nozzle (i lost my wider one- otherwise i would go 0.8mm) I share my print settings for white PLA - feel free to adjust it and i strongly recommend to use bigger nozzle size Category | Setting | Default settings | My settings Filament | Extrusion multiplier | 1 | 1.1 Temperature | Nozzle temperature | 205 | 210 Retraction | Retraction Length | N/A | 0 Cooling | Fan Max | 100 | 80 Cooling | Fan Min | 100 | 80 Extrusion width | External perimeters | 0.4 | 0.6 Extrusion width | Perimeters | 0.4 | 0.6 Overlap | Infill/perimeters overlap | 23% | 35% Speed | External perimeters | 25 | 15 Speed | Small perimeters | 25 | 15 Infill | Fill density | 15% | 0% Vertical shells | Perimeters | 3 | 1 Vertical shells | Spiral vase | false | true Horizontal shells | Top solid layers | 5 | 0

Similar models