matplace
Flashforge AD5M - Enclosure attached tool holder

Flashforge AD5M - Enclosure attached tool holder

by Vic · Printables

Do you have the file? Print it on our printer

The licence of the model (CC BY (attribution)) allows commercial use too. Download the file at the source and upload it to us. We note the author and the source on the order for you.

Upload the file and print
Licence
CC BY (attribution)
Largest side
about 110 mm
Printing estimate
about 68 g of filament, 2 h 36 min
Price with us
from €7.60 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

A custom tool and nozzle caddy mounts directly to the left corner of the Flashforge Adventurer 5M enclosure using the panel screws. It neatly holds standard maintenance tools including pliers, calipers, extra nozzles, a scraper, and small accessories. Position the part flat on its base, adding supports solely beneath the overhang of the cutting pliers slot. A standard layer height of 0.2 mm ensures a balance of precision and speed, while PETG is the recommended filament choice to withstand the mechanical load and ambient enclosure heat.

The author's original description (English)

This is a tool and nozzle holder for the Flashforge AD5M enclosure kit.It has been designed to fit to the far left corner and positioned to fit to the Standard Enclosure panel screw places. You will need to change the original M4 screws to a bit longer ones. It has room for all the standard AD5M tools and nozzles plus some more as you can see on the picture. You can add a scraper, there is a small box for stuffs like filament clips, you can add one more screwdriver and a Caliper.It was designed with a small offset of the nozzle holder to be able to remove the left side plexiglas panel without a hassle in case it's needed. Printing details: I made it from PETG with 15% infill, you can try PLA but I would go with at least 30% infill with PLA as it is less strong materialSupports: it needs support only for the cutting pliers holder (see the pic)With 15% it consumes about 167g material

Similar models