matplace
Fireworks at Night - Dual Lithophane Hueforge Print

Fireworks at Night - Dual Lithophane Hueforge Print

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only
Largest side
about 150 mm
Printing estimate
about 85 g of filament, 5 h 20 min
Price with us
from €11.70 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

Fireworks at Night - Dual Lithophane Hueforge PrintThis print is a really, really cool dual lithophane piece. If you put a backlight behind it, or hold it up against a light, it will shine through the fireworks as if the print is coming to life.Video here: https://imgur.com/7386cnXPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmFilaments Used:PLA META Sunlu White Transmission Distance: 9.6PLA Overture Cream Transmission Distance: 8.4PLA META Sunlu Red Transmission Distance: 4PLA+ Overture Dark Blue Transmission Distance: 1.8PLA META Sunlu White Transmission Distance: 9.6PLA Siddament Black Transmission Distance: 0.2Swap Instructions:Start with WhiteAt layer #20 (0.96mm) swap to CreamAt layer #31 (1.4mm) swap to RedAt layer #42 (1.84mm) swap to Dark BlueAt layer #48 (2.08mm) swap to WhiteAt layer #49 (2.12mm) swap to Black for the rest.

Similar models