matplace
Fidget Gear Ring

Fidget Gear Ring

by DrJones · Printables

Print it for yourself

The licence (CC BY-NC-ND (non-commercial, no derivatives)) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
CC BY-NC-ND (non-commercial, no derivatives)
Largest side
about 25 mm
Printing estimate
about 8 g of filament, 42 min
Price with us
from €3.40 (PLA, 1 pc)The exact price comes from the calculation once the file is uploaded.

About the model

This is probably my best fidget toy! I printed dozens of them because people wanted them. Edit: Meanwhile I have a bunch of different fidget gear ring designs. EDIT: I reuploaded these as 3mf with parts for easy coloring; changing color of only parts 3 and 4 requires only 4 color swaps, allowing manual filament swaps or reducing waste for pooping single nozzle filament changers. Parts: 1: sun gear — 2: planet gears inner part — 3: planet top 2 layers — 4: planet bottom 2 layers — 5 ring gear. I also added a turn tool ans matching turn tool slots inside the ring, which makes it easier to break it loose , and to break it in with a power tool. And I added a set with a slightly wider tolerance for those who have difficulties breaking the rings free or run smoothly. It's a small, but satisfying fidget toy. You'll probably not want to wear it all the day due to it's size, but it's unobtrusive enough so you can still do a lot of things while wearing it. But while wearing it, you have a fidget thing right at hand for some quick fidgeting. (I'm wearing one as I type, and fidgeting with it when I'm thinking about what to type next.) Also the little planet gears look like plus signs - for some positive influence :) and they look quite a bit mesmerizing when moving in perfect unison. I uploaded 5 sizes, 14mm, 16mm, 18mm, 20mm and 22mm. If you need another size, ask in the comments and there's a good chance I'll make that. Printing: • 0.4mm nozzle (or lower?), • random seam placement, • I use 0.17mm layer height. • Tolerances are tight; requires a well tuned printer. You might need to use a bit of force to break the gear loose at first, but after a bit of breaking in it is supposed to run quite smoothly. If you can't get it free, try: • a different filament, some work better than others. Silk seems to be prone to fuse. • reducing the extrusion multiplier (flow ratio) a bit • or use a slightly negative value for XY size compensation (PrusaSlicer), e.g. -0.02mm (Orca: contour -0.02, hole +0.02). Happy fidgeting!

Similar models