matplace
Desktop Dustpan & Brush

Desktop Dustpan & Brush

MakerWorld

Print it for yourself

The licence (personal use only) allows non-commercial use only. Download the file at the source, upload it to us and print it on the rented printer for your own use, not for sale.

Upload the file and print
Licence
personal use only

About the model

A desktop dustpan and brush, designed mainly for scooping out the odd bits of filament in enclosed printers like the X1C and P1S. Required TPU - I used eSUN TPU-95a. Magnets 8mm x 3mm Print settings The included 3mf file is ready to print, supported where needed. If you are printing the STL files manually, use the following: • Print the Dust pan in PLA @ 0.20 with support on build plate only. Support are just for the magnet holes • Print the Handle in PLA @ 0.20 with NO SUPPORTS but with a brim. • Print the TPU Brush End.stl in TPU as the model imports @ 0.16. No supports. Have faith. PEI sheet works well here as TPU stick very well. Installation • Pop the supports out of the Dustpan and insert magnets into the 2 holes. Glue if needed. • Insert magnets into the Brush Handle, Glue if needed. • Add a magnet to the Dustpan where the Brush joins, making sure the polarity is correct :) • Insert the TPU “bristles” into the Brush Handle, add a blob of super glue mid way if you need a tighter fitting. • Attach to side of printer when not in use. • Rejoice while cleaning the bottom of your 3d printer :D Boost MeLike share and boost if you enjoy :)

Similar models