matplace
Tulip Decor Figurine

Tulip Decor Figurine

autor 29flo · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-ND (jen nekomerčně, bez úprav)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-ND (jen nekomerčně, bez úprav)
Největší rozměr
asi 110 mm
Odhad tisku
asi 48 g filamentu, 3 h 35 min
Cena u nás
od 196 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Tulip Decor Figurine Feel free to scale it as desired. For sure you can make it bigger. If you choose a smaller size, the model will be more prone to damage. Don’t be tempted by a shorter printing time—take your time to print it properly, and you won’t have to print it twice! :)   If reducing print time is absolutely essential for you, you can simply increase the layer height. Just keep in mind that this will also reduce the level of detail.   Be careful when removing supports. Stem might be fragile. Take your time!   Printed with Fuzzy Skin effect. Fuzzy Skin: All Walls Fuzzy Skin Point Distance: 0.35 Fuzzy Skin thickness: 0.2 If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo   As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.   All my photos are real and show an actual 3D-printed figure photographed by me.

Podobné modely