matplace
Solar System Lithophane Planet Lamp Collection - ⌀75mm

Solar System Lithophane Planet Lamp Collection - ⌀75mm

autor FritzPeppone · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 75 mm
Odhad tisku
asi 24 g filamentu, 2 h 22 min
Cena u nás
od 130 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

IntroductionThis model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm, ⌀205mm, ⌀150mm, ⌀75mm (this upload), ⌀25mm.If you like my work, please consider supporting me. Your support will help me to make more models available for free. https://ko-fi.com/fritzpeppone. If you like to use my models commercially, please obtain a commercial license by joining my club. The commercial license includes all of my models except those that are based on the intellectual property of others (e.g. the GTA V map lamps) or remixes (e.g. the Death Star or Phobos lamps).RequirementsThe regular lamp size is ~ 75mm x 75mm x 70mm. There is also a “large” version in ~ 100mm x 100mm x 95mm available (so far only for the sun). They should print fine on all FDM printers and on most SLA printers. You will need around 30g-40g of Filament (preferably PLA or PLA+) for the regular sized lamp.The lamps are mounted to their base with a M28x2 metric thread. The idea for the thread is from the Lithophane Moon Lamp with wide Screw Base by The Quicksilver. I am providing multiple different illumination options that all use the same thread. Choose the lamp of your liking and match it with any illumination of your liking. All compatible lamp bases are listed below. You may either need a standard E14 socket with a small LED, a Keystone socket, USB LED stick and a USB cable, an Ikea Solvinden fairy light or a magnetic button cell PCB with LEDs.Print SettingsThere are only a few settings you should tweak in the slicer to print the lamps. Print in PLA or PLA+Recommended layer height: 0.15mmUse the Arachne Perimeter Generator for more precise printing with better detailsIf you use Arachne, set the minimum line width to 75% to avoid holes!Set wall count to 5-6 to obtain a solid lampSet seam position to alignedActivate Brim (Outer Brim Only) and set the Brim width to 5-10

Podobné modely