matplace
Solar System Lithophane Planet Lamp Collection - ⌀205mm

Solar System Lithophane Planet Lamp Collection - ⌀205mm

autor FritzPeppone · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 205 mm
Odhad tisku
asi 285 g filamentu, 11 h 20 min
Cena u nás
od 712 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

IntroductionThis model is part of my Solar System Lithophane Lamp Series. As of now, all planets and several moons of the solar system are available as lithophane lamps in five different sizes: ⌀295mm, ⌀205mm (this upload), ⌀150mm, ⌀75mm, ⌀25mm. If you like my work, please consider supporting me. Your support will help me to make more models available for free. https://ko-fi.com/fritzpeppone. If you like to use my models commercially, please obtain a commercial license by joining my club. The commercial license includes all of my models except those that are based on the intellectual property of others (e.g. the GTA V map lamps) or remixes (e.g. the Death Star or Phobos lamps). RequirementsAll Lamps have a size of ~ 205mm x 205mm x 195mm. They should print fine on most printers except for small printers such as the Prusa mini or Bambu A1 Mini. You will need around 300g of Filament (preferably PLA or PLA+) per lamp. The lamps are mounted to their base with a M75x4 metric thread. The idea for the thread and also the thread dimensions are taken over from the Lithophane Moon Lamp with wide Screw Base by The Quicksilver. This means that his moon lamp as well as his mounting options are compatible with my lamps and bases. I am providing multiple different base options that all use the same thread. Choose the lamp of your liking and match it with any lamp base of your liking. All compatible lamp bases are listed below. You may either need a standard lamp base with a E14 or E27 thread or threaded E14 or E27 sockets. Some Bases also require M3 heat set inserts and M3 BHCS screws. There is additionally the option to use a a Bambu LED Kit as base. Print SettingsThere are only a few settings you should tweak in the slicer to print the lamps. • Print in PLA or PLA+ • Recommended layer height: 0.15mm • Use the Arachne Perimeter Generator for more precise printing with better details • If you use Arachne, set the minimum line width to 75% to avoid holes! • Set wall count to 5-

Podobné modely