matplace
Organizer Box XL

Organizer Box XL

autor 3DPrintyi · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 280 mm
Odhad tisku
asi 420 g filamentu, 14 h 50 min
Cena u nás
od 979 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Please read the description! When you decide to print my model please print the normal box first and look how it goes before you print the organizer holder!  This model is not compatible with gridfinity! All inserts from the smaller box still fit. I have created additional inserts that only fit in the XL version. (InsertsXL_V01) I also adjusted the model a little bit so that everything fits. Because it is the XL version, the filament consumption is quite high. Please keep this in mind. Why did I choose a 5x4 grid and not something bigger? Because many people don't have a large 3D printer (300x300x300mm). The filament consumption would have been too high and the stability would not have been as good. I think a 5x4 grid is the optimal choice. I hope you like this larger design! You need at least a 3D-printer with a bed size of 250x210x 220mm or above that! Size of the Models: Other Organizer Boxes: Organizer Box Small: https://www.printables.com/de/model/942089-organizer-box Organizer Box XL Double: https://www.printables.com/model/1029683-organizer-box-xl-double Organizer Box Small Double: https://www.printables.com/model/1099413-organizer-box-small-double New Organizer Box XL Pro: https://www.printables.com/model/1473064-organizer-box-xl-pro This organizer box (XL Version) has a lockable sliding mechanism. The boxes can be stored in a holder with up to 4 pieces. You can connect the holders with connectors in any direction and thus hold them all together. Inserts are available in all sizes, but more from me will be added from time to time! The box should only be placed directly on the table and not mounted to the wall, as it is made of plastic. Important!!! You can only connect the box holders with the same sizes in the horizontal length. For the vertical height it doesn't matter which sizes you want to combine. (see picture below) Here are my tipps for printing! Please use these values, as I have adapted my models to these and only so I can guarantee t

Podobné modely