matplace
One For All | Cable Strap | Print In Place Clamp | Belt

One For All | Cable Strap | Print In Place Clamp | Belt

autor Extrutim · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-SA (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-SA (jen nekomerčně)
Největší rozměr
asi 85 mm
Odhad tisku
asi 18 g filamentu, 1 h 29 min
Cena u nás
od 97 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

A cable strap to keep all sorts of cables from turning into a big knot. My goal was to find a solution that could handle all sizes of cables. For small charging cables there are already many models, but large cables also knot quickly. But you can also use it for much more, e.g. tie tension belts together or hold your skis in place. I was surprised myself how sturdy the strap is, I was able to lift 10kg without the strap slipping or opening. The clamp is printed in place, you don't need supports. Choose a length of the strap which is then slid into the opening from the side. Optionally you can print a bracket if you want to attach the cable tie permanently to a cable. Print Instruction: • 0.2mm layer height • 2 perimeters • 10-15% Infill Attention: I've added a new version of the clamp which has larger clearance. The new perimeter generator "Arachne" from Prusaslicer 2.5 has the individual parts otherwise connected. If the new clamp in your case shouldn't have enough clamping effect, download the version with smaller tolerance. Here you have to change the perimeter generator in Prusaslicer to "classic". You can find it under: Print Settings -> Layers and perimeters -> Advanced -> Perimeter generator I've printed mine from PLA. PC, nylon or other filaments with a very good layer adhesion are most suitable for the belt. TPU for the belt is probably also a good option. Important: Make sure that your first layer is set correctly. This will affect the thickness of the strap and therefore the function of the clamp. Also, over extrusion can affect the function of the print in place mechanism. If it does not move after printing or the lever cannot be released by pushing it, you will need to lower your flow rate slightly. I have created five different lengths from 150mm to 350mm. The longest version does not fit on the MK3. I have subsequently added a 240mm version that makes maximum use of the Prusa Mini's print bed. The tolerances for the print-in-place machanism are

Podobné modely