matplace
Kumiko Asanoha Coaster

Kumiko Asanoha Coaster

autor DSCMaker · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC-ND (jen nekomerčně, bez úprav)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC-ND (jen nekomerčně, bez úprav)
Největší rozměr
asi 105 mm
Odhad tisku
asi 18 g filamentu, 1 h 35 min
Cena u nás
od 100 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

💮 The Concept This project revisits the traditional Japanese Asanoha (hemp leaf) pattern, often used in the art of Kumiko, to create functional and aesthetic coasters. Designed to be easy to print, this set brings a touch of geometric sophistication to any interior. 🛠 Included in this Model: • Shape Variants: 3MF files for both Square and Round versions. • Dedicated Holders: Two elegant holder models, perfectly fitted to accommodate 4 coasters each. ⚙ Recommended Print Settings Here are the settings I used to achieve the best results: Parameter Recommended Value Technical Note • Nozzle 0.4 mm Standard. • Layer Height 0.2 mm Good balance between speed and detail. • Infill 15% - Grid 10% may be sufficient. • Walls Minimum 2 Use 3 to further improve strength. • Others No supports, No skirt Unless your build plate has adhesion issues, a Brim is not necessary. https://www.patreon.com/cw/DSCMaker

Podobné modely