matplace
*CHTNozzle/TPU* Tuned Profiles - Bambu/OrcaSlicer

*CHTNozzle/TPU* Tuned Profiles - Bambu/OrcaSlicer

MakerWorld

Vytiskněte si ho pro sebe

Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
jen pro osobní použití

O modelu

Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one, you'll need to buy a kit from aliexpress or some local retailer. Note that these are NOT official BondTech CHT nozzles, but a chinese clone for the X1/P1P. I'd buy official ones if I could to support BondTech, but they haven't made anything available. I've included a picture of the nozzle as part of the image so nobody gets confused. Change log: • Added Overture Digital Blue TPU (7/30/23). VFR = 6.5 (up from 3.75 in normal nozzle) • This needed a lot of tuning to produce good test Eevee prints. • Added Overture Clear HighSpeed-TPU (8/4/23). VFR= 12 mm^3/sec. Do not confuse this with regular Overture TPU! • Added Ninjatek Cheetah Grey TPU (8/7/23). VFR= 6.2 mm^3/sec. • Added Inland White TPU (8/7/23). VFR= 5 mm^3/sec. • Added Bambu Black HF TPU (5/27/24).  VFR= 12 mm^3/sec.    What this is: This is a collection of all of my TPU filament profiles for all filaments I've used of this type. I happen to have a decent amount of California Filaments because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see my models here) and you should find, by category: Standard Nozzle (0.4 mm , Hardened Steel, should work for P1P/P1S as well) • TPU / Flexibles • Nylon/PA and PACF variants • Polycarbonate & Polycarbonate-CF • PLA / PLA + / Silk PLA • ABS / ASA CHT-Nozzle (0.4 mm , Brass) • PLA • PETG • ASA   How to use: These 3MF files are designed for use in Orcaslicer/Bamb

Podobné modely