Sonic Pad Mount
MakerWorld · chrscoop
MakerWorld
Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.
Nahrát soubor a vytisknoutImportant note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one, you'll need to buy a kit from aliexpress or some local retailer. Note that these are NOT official BondTech CHT nozzles, but a chinese clone for the X1/P1P. I'd buy official ones if I could to support BondTech, but they haven't made anything available. I've included a picture of the nozzle as part of the image so nobody gets confused. Change log: • Added Prusament Orange Transparent PETG (7/30/23). VFR =22 ! • Added Prusament Carmine Red PETG (7/30/23). VFR = 22 • Added California Filaments Cloudy White PETG (7/31/23). VFR = 23.5 • Added Prusament Neon Green PETG (8/27/23). • Added Prusament Urban Grey PETG (8/27/23). • Added Prusament Matte Black PETG (8/27/23). • Added Prusament Chalk Blue PETG (8/27/23). What this is: This is a collection of all of my PETG filament profiles for all filaments I've used of this type. I happen to have a decent amount of California Filaments because I've found that brand works well with this printer, and you can push the flow rates higher with it than some others. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see my models here) and you should find, by category: Standard Nozzle (0.4 mm , Hardened Steel, should work for P1P/P1S as well) • TPU / Flexibles • Nylon/PA and PACF variants • Polycarbonate & Polycarbonate-CF • PLA / PLA + / Silk PLA • ABS / ASA CHT-Nozzle (0.4 mm , Brass) • PLA • TPU • ASA How to use: These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fi
MakerWorld · chrscoop
MakerOnline
MakerOnline · haietom
MakerOnline · Flonfli
MakerOnline · Adivor
MakerWorld · Frontier
MakerOnline · F96
Cookies a měření. Nezbytné cookies jsou vždy; měření návštěvnosti a reklamy jen s vaším souhlasem. Víc o cookies