matplace
Cardboard Spool Ring for Bambu Lab AMS (parametric)

Cardboard Spool Ring for Bambu Lab AMS (parametric)

autor Blizzard · Printables

Máte soubor? Vytiskněte ho na naší tiskárně

Licence modelu (CC BY (s uvedením autora)) dovoluje i komerční použití. Stáhněte si soubor u zdroje a nahrajte ho k nám. Autora a zdroj uvedeme u objednávky za vás.

Nahrát soubor a vytisknout
Licence
CC BY (s uvedením autora)
Největší rozměr
asi 95 mm
Odhad tisku
asi 18 g filamentu, 1 h 29 min
Cena u nás
od 97 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

The one spool ring to rule them all! Bambu Lab doesn't recommend using filaments with cardboard spools with the AMS, as they can produce dust and block the rollers or the cardboard edges could fray, causing issues. By snapping this model onto the cardboard spools, only plastic makes contact with the AMS, solving these issues. If you like what I'm doing, please give it a like 👍 consider joining my club or buying me a coffee! 😃👍 Compatibility Tested to work with the cardboard spools from the following filament brands: • 3DE Premium • 3DQF • Anycubic • Canadian Filaments • Creality • Duramic • Elegoo • eSun • Filamentive • Filaments.ca • FIXDRY • GNVTNTP • Inland • Jayo • KYUUBI • Matter3D • OtterTek • Overture • OVV3D • Polymaker (e.g. PolyTerra / PolyLite) • Print Bed • real Filament • Redline • Reflow • Smartfil • Sparta3D • X3D • Ziro • (Jessie filament spools are too wide for the AMS) If you find this works with a brand of filament with cardboard spools that are not listed here, please leave a make or a comment and I will add it to the list! Printing instructions I recommend you to print the regular cardboard_spool_ring file first and make sure the diameter is exactly 202 mm. If it doesn't fit in your AMS or you have other issues, look at the Versions / Troubleshooting chapter below. You can also have a look at the makes and see if someone else used the same filament as you and used any special parameters to make it work. Prints nicely without supports in PLA at 0.20 mm layer height. I provided the STL (to use in your favorite slicer) as well as the Fusion 360 design file, should you need to make changes for a filament brand with a different spool size or hole pattern. I also provided two “.gcode.3mf” files (one for Bambu Basic PLA, one for Generic PLA) which you can directly put on a microSD card, insert into your Bambu Lab X1C, and print from the touchscreen. If your printer is not dimensionally accurate you may have to scale

Podobné modely