matplace
Bambu Lab X1 Y-Splitter with inlet for pneumatic connector G1/8" (M10).

Bambu Lab X1 Y-Splitter with inlet for pneumatic connector G1/8" (M10).

MakerWorld

Vytiskněte si ho pro sebe

Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
jen pro osobní použití

O modelu

    Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would help me and the community to leave a comment on how this version works to decide whether to release it or not. The file is recommended to print vertically with a layer height of 0.12mm and a 25% infill. It is necessary to cut the ptfe tube that goes from the splitter to the extruder to a certain size. Because each machine is different in its construction there is no standard measurement so you have to measure yourself, the splitter has a mark to use as a reference for the measurement. Attached are pictures of how to do it.     The idea is that the ptfe tube is as straight as possible occupying all the useful space of both connectors. Leaving spaces unoccupied by the ptfe tube can cause a malfunction in the filament loading. Optional: You will see that the single connector has a cutout that reveals the ptfe tube. This is to use the ptfe tube without using the connector. It has been tested with success, but I decided to leave the thread for the M10 connector and let everyone choose what to use. Needless to say that to use this option it is necessary that the splitter is attached to the machine, otherwise it will not work. Attached a video example of its operation without connector:   The rubbing sound when loading the filament is only noticeable during filament loading. Perhaps printing the design from the side will reduce it, but the threads and holes may not come out correctly. Optional 2: If you want to eliminate problematic elements like the coupler, I think it is possible. You would have to put a new ptfe tube from the extruder to the splitter and connect it to the pneumatic connector of the splitter. Fewer elements, fewer possible problems.   Thanks to all. ESPAÑOL Actualización 27/10/22: Algún usuario m

Podobné modely