matplace
Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS

autor Miklos Kiszely · Printables

Vytiskněte si ho pro sebe

Licence (CC BY-NC (jen nekomerčně)) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
CC BY-NC (jen nekomerčně)
Největší rozměr
asi 180 mm
Odhad tisku
asi 184 g filamentu, 7 h 0 min
Cena u nás
od 461 Kč (PLA, 1 ks)Přesnou cenu spočítá kalkulace po nahrání souboru.

O modelu

Purely mechanically controlled filament winder for Bambu Lab P1, X1, X1C or X1CC 3D Printer.Printed on Bambu Lab X1 CC.Watch the videos first at the bottom, at the end of the description.If there is news about the model, you will find out there first.The model is available for free download and use.If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via:https://paypal.me/mikloskiszelyPlease use always bed leveling & flow calibration for this model, especially for the gears and axles!Bambu Lab P1 should at least be calibrated. (linear advance) I uploaded some print suggestions as *.3mf files.(5 print plates for Bambu Lab / Bambu Studio with PEI plate @ the end of the list - attention, not cold plate)Update:I tested the "maschine" again and again and it happened to me too: the 45 mm axle (the driven one) broke!The 3 walls and 25% infil are not enough!If you haven't printed it yet or broke it, then please print it with:0.16mm Optimal @BBL profile5 or more wall loops100% infill (sparse infill density)Rectilinear (sparse infill pattern - set automatically)speed outer wall (slow as possible for more accuracy) e.g. max 60 mm/ssupport (yes) normal (auto)Update 2:If the stronger printer settings for Axis 45mm are not enough, the you can also print the “Heavy Load” version (see folder “Heavy Load Parts”)Centering discs:If you need a special size, you can decrease or increase the next size in the slicer program.E.g. if you need 51.5 mm, then you can take the 50 mm disc and scale up accordingly before printing.(51.5 / 50 = 1.03, i.e. print 3% larger)Reference print settings for:Winder Spool Holder Main BodyDonor Spool Holder FrameWinder and Donor Right Hand Spool Axle NutDonor Spool Holder Axle without Gearall Spooler Centering Discs (50/55/60/65 mm)Settings:0.20mm Standard @BBL X1C Profile+custom settings:Wall loops: 3Outer wall: 60 mm/sInfill 25 %if you need support, don't do it at the

Podobné modely