Articulated Sea Turtle (singlecolor and multicolor)
autor Jopek Design · Printables
Vytiskněte si ho pro sebe
Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.
Nahrát soubor a vytisknout- Licence
- jen pro osobní použití
O modelu
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 60% of the original size in single color, if you have a well calibrated, and reasonably accurate setup. Files information I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them. This design is a part of the Articulated Sea Life collection by me. You can check out other designs from this collection here. The Articulated Sea Life collection is a live project, and I'm continuously adding new designs, anytime I get an interesting idea, or a suggestion. The designs are also updated, if any changes or tweaks have to be made. Feedback, suggestions and ideas are welcome! Material PLA Layer height 0,2 mm Infill >15% Support None. The model doesn't require any support material. Scaling The model should come out perfectly functional even at lower scales. Tested up to 60% of
Podobné modely
Buzz Lightyear Multipart Fanart
matplace
Cat
MakerOnline · Yang3D(
Stitch NO AMS
matplace
Streetwear Bowser Figure | Super Mario Urban Fan Art
Printables · Fluid Prints
Tom Cat
matplace
Flexi Factory and Bambu Lab Collaborative: Panda Bear and Stand
MakerWorld · flexi.factory
