matplace
- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

- ABS/ASA - Tuned X1C Print Profiles for Bambu/Orca-Slicer

MakerWorld

Vytiskněte si ho pro sebe

Licence (jen pro osobní použití) dovoluje jen nekomerční použití. Stáhněte si soubor u zdroje, nahrajte ho k nám a vytiskněte na pronajaté tiskárně pro vlastní potřebu, ne na prodej.

Nahrát soubor a vytisknout
Licence
jen pro osobní použití

O modelu

Changelog: • Added Polymaker Polylite ASA (4/20/23) • Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf • (4/30/23): Fixed the ASA profile to have the filament type set to "ASA" instead of "ABS". Same exact settings otherwise as the profile from 4/21/23. New file replaces previous versions: Polymaker_Grey_PolyliteASA.3mf • (5/6/23): Added Prusament_GalaxyBlack_ASA.3mf • (5/17/23): Improved Prusament_GalaxyBlack_ASA.3mf settings. If you downloaded before this date, please re-download for better PA and retraction values. • (5/23/23): Improved Prusament_GalaxyBlack_ASA.3mf settings, again after dealing with frustrating under-extrusion issues impacting part strength. Sadly I can't get the volumetric above 11 for this one. Updated preset to my best settings. • (6/6/23): Added Prusament_SapphireBlue_ASA.3mf. Volumetric = 19 unlike the troublesome Galaxy black ASA. • (6/14/23): Added Prusament_SignalWhite_ASA.3mf, also revised the Sapphire Blue again. Note: VFR=19 on both still, but this appears aggressive for this filament and you may need to slow down the VFR to ~14 if you experience any under-extrusion issues. Annoyingly hard to tune PA for this ASA… there's no “ideal value” with either autocal or manual calibration, but 0.02 appears best. • (8/9/23): I decided not to shrink-compensate my profiles because I think it's likely to introduce confusion for people who are used to scaling for these filaments, but for people who want to combat the common shrinkage in ABS/ASA, please see my other model here that helps you calibrate.   What this is: This is a collection of all of my ABS/ASA filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. Right now for ABS this is polymaker-only, but I plan to try more brands. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and over

Podobné modely